Download Print this page

Advertisement

Quick Links

Congratulations on buying your
.
Please read this manual carefully before using the
product. This manual explains how to set up and
use your device. For further information please
visit www.re-timer.com. Please read all warnings
and cautions before you use your device.

Advertisement

loading

Summary of Contents for RE-TIMER RE-TIMER

  • Page 1 Congratulations on buying your Please read this manual carefully before using the product. This manual explains how to set up and use your device. For further information please visit www.re-timer.com. Please read all warnings and cautions before you use your device.
  • Page 2: Definition Of Symbols

    Definition of symbols European Declaration of Conformity Manufacturer: SMR Automotive Australia Pty Ltd. 18 Sherriffs Road, Lonsdale, South Australia 5160 Date of Manufacture Serial Number General Warning Sign Recycling symbol. Symbol in com-pliance with EU Directive 2002/96/EC on waste electrical and electronic equipment (WEEE) indicating the use of separate collection and recycling methods when disposing of this product.
  • Page 3 To time these rhythms, photoreceptors in our eyes detect bright light. This is why the Re-Timer focuses light on your eyes. Often, however, we do not receive the daily bright light we need to maintain a well-timed body clock and natural energy levels.
  • Page 4: Charging The Battery

    Charging the battery Follow these steps to charge your device: 1) Plug the charging cable into the USB port of your Re-Timer (Diagram 1, a). 2) Plug the opposite end of the charging cable into either your computer’s USB port or a USB wall adapter (not supplied).
  • Page 5 When the battery is fully charged it contains enough power to provide up to 5 hours of battery life. When your Re-Timer is low on battery power, the Battery Indication Light will flash (Diagram 2, b). Warning : You must not use the device whilst it is charging.
  • Page 6 Turning the Re-Timer on and selecting the light intensity setting Before you place the Re-Timer on your head, turn it on by pressing the control button (Diagram 2, e) once. This will turn the lights on to the half- brightness setting. If you prefer the full brightness setting, press the control button a second time.
  • Page 7 Adjusting the Re-Timer Once you have turned your Re-Timer on and selected your preferred brightness setting, place it on your head. If you wish to wear your reading glasses while you use your device, put your reading glasses on first, then the Re-Timer.
  • Page 8 Once the Re-Timer is on your head you can make small adjustments to optimize the amount of light reaching your eyes. By sliding the top section of the nose-piece (Diagram 3, f ) in and out of the frame (Diagram 3, h) you can move the device closer to or further away from your face.
  • Page 9 Turning the Re-Timer off Once you have finished using your Re-Timer remove it from your head. Turn it off by pressing the control button (Diagram 2, e). Press the button once if you were using the full brightness setting; twice if you were using the half brightness setting.
  • Page 11 *Generally, using the Re-Timer for up to 60 minutes in the morning for 6–7 mornings in a row may help you manage your sleep trends. Ensure you use your Re-Timer earlier each morning until you reach your desired wake up time.
  • Page 12 Frequent flyers Re-Timer may help to minimize the effects of jet lag. The most effective times to use your device will depend on the number of time zones you are crossing and your usual sleeping and waking schedule. Please visit www.re-timer.com to use the travel calculator.
  • Page 13: Specification

    Your local or national recycling organizations may also have disposal information. Contact us at www.re-timer.com if you require further information on recycling. Recycling symbol. Symbol in compliance with EU Directive 2002/96/EC on...
  • Page 14: Warranty

    Conditions of Use – Cautions: • The Re-Timer contains a rechargeable lithium- ion polymer battery. Do not attempt to remove the battery or expose the battery to high temperatures. Recharge the battery using the USB cable provided.
  • Page 15 • Do not operate this device in temperatures below +5°C / 41°F or above +40°C / 104°F with a relative humidity range of 15% to 93% non- condensing. Batteries can overheat, causing fire or bursting. Dispose of internal battery in accordance with local regulations.
  • Page 16 noticeable misalignment of the device, stop using it and contact your retailer for assistance. • If this device is damaged in any way or is not working, it should not be operated and you should contact your retailer for assistance. Conditions of Use –...
  • Page 17 • The Re-Timer is not a medical device. We recommended you do not use the Re-Timer if you have or have had any of the following: • Any eye disease such as, but not limited to, cataracts, glaucoma, retinal disorders (e.g.
  • Page 18 Research shows that a small percentage of the population experience side effects when using light therapy. These side effects may include headache, dry mouth, eyestrain, nausea and hyperactivity. These side effects can usually be resolved by simply stopping use of the device. The information contained in this document is not intended to be used as medical information or as a substitute for your own health professional’s advice.
  • Page 19 suitable for your specific personal needs. Subject to any rights imposed by applicable law that cannot be limited or excluded: 1) All liability of any kind arising from use of this product is excluded. 2) All guarantees, warranties, terms or conditions implied by applicable law are excluded to the fullest extent legally permitted, without affecting any express warranty against defects that...
  • Page 20 Instruction Manual Revision Level: A © Copyright 2017 Re-Time Pty Ltd is a trademark of Re-Time Pty Ltd www.re-timer.com is property of Re-Time Pty Ltd Re-Time Pty Ltd, L2, Flinders University Bld, 1284 South Rd Clovelly Park, South Australia 5042...