Introduction; Power Amplifier Accessory Pack - Rockford Fosgate 1000 Installation And Operation Manual

I
N T R O D U C T I O N
Rockford engineers designed the Power amplifiers to provide an awesome
amount of power while delivering superior sound quality in a convenient and
efficient package. The TRANS• ana & patented TRANS• nova topologies are
low voltage circuits used in the preamp stage of the Power amplifiers that let
the music sound crystal clear and very real, even when played at high
volume levels. This is matched with TOPAZ, a unique grounding circuit used
to eliminate noise problems associated with car audio systems and their
installation. The use of a protection circuit called NOMAD, along with
MOSFET, DSM (Discrete Surface Mount) and innovative MEHSA heat
dissipating technologies improves amplifier efficiency. The result of these
components give the Power amplifier awesome sound quality in a "Bullet
Proof" package.
P A
OWER MPLIFIER
The accessory pack shipped with the Power amplifiers includes the mounting
hardware necessary to secure the amp to the vehicle.
Installation & Operation Manual
Punch Verification Certificate
(4) Amplifier mounting screws (#8 x 3/4" Phillips)
(4) Speaker/Power connector set screws (3/32" Allen)
(4) Endbell mounting screws (9/64" Allen)
(1) Allen wrench (3/32")
(1) Allen wrench (9/64")
(1) Inline fuseholder (Power 360, Power 400 & Power 500 2-channel amps)
(1) AGU 40 amp fuse (Power 360 2-channel amp)
(1) AGU 50 amp fuse (Power 400 4-channel & Power 500 2-channel amps)
(1) Remote Punch Bass (replacement part #WP-2429)
(1) 15' Remote Punch Bass cable (replacement part #CC-2421)
(2) Remote Punch Bass bracket screws (4 x 7/16" Phillips)
NOTE: Refer to the specifications section for recommended fuse sizes on the
Power 800 2-channel, Power 800 4-channel & Power 1000 2-channel amps.
A
CCESSORY
– 1 –
P
ACK