Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for ODM RP455
Summary of Contents for ODM RP455
- Page 1 Models RP455, RP460 Optical Power Meter ____________________________________________________________________________________ 143 Lake St, Laconia, NH USA 03246 ◘ 603-524-8350 Fax - 603-524-8332 ◘ www.odm-inc.com RP455, RP460 1-25-11 Specifications subject to change without notice...
-
Page 2: Table Of Contents
Contents Introduction 1.0 General Information & Operation 1.1 Unpacking and Inspection 1.2 Features/Display Review 2.0 Maintenance 2.1 Warranty 2.2 Low Battery 2.3 Optical Connector 2.4 Calibration 3.0 Specifications 4.0 Accessories 5.0 USB Download Instructions (RP 460 only) 6.0 Contact Information Page 1 of 14... -
Page 3: Introduction
Thank you for choosing ODM, Inc. for your fiber optic testing requirements. Our professional staff is available to answer any questions or provide assistance that you may require. We, at ODM Inc., strive to provide premier customer care and technical support by providing timely responsiveness and training. We are proud of our quality and high standards and assure you, our customer, the most user friendly and affordable fiber optic solutions to meet individual needs. - Page 4 ODM Optical Power Meter Page 3 of 14...
-
Page 5: General Information & Operation
1.1 Unpacking and Inspection The RP 455/460 comes supplied with a 2.5 mm universal adapter attached to the detector housing (# 1, Figure 1.1). Other connector adapters are available from ODM. Please see section 4.0 for available connector adapters. 1.2 Features/Display Review [1] Connector Adapter –... - Page 6 [4] SAVE – The RP 455/460 allows storing up to 1000 data measurements per wavelength. Pressing the SAVE key will store the current measurement whether it be an absolute power measurement in dBm or a loss measurement in dB. Each time the SAVE key is depressed the display flashes the stored measurement and the storage location.
- Page 7 once again, follow the disable procedure by depressing the USB key and then the POWER ON key. This key stroke sequence is done while in the OFF mode. To power on the RP 455/460 for indefinite operation press and hold the POWER ON key for three seconds. Conformation of the continuous on operation is provided by two short beeps.
-
Page 8: Maintenance
2.0 Maintenance Warranty – All ODM products are warranted for a period of two years from date of manufacture. Buyer must obtain a RMA before returning defective products. ODM will at it’s discretion repair or replace the defective equipment. Please contact ODM Inc. -
Page 9: Specifications
3. 0 Specifications Wavelength 800nm to 1600nm Detector Type Germanium, RP 455/460-02 InGaAs, RP 455/460-03 Filtered InGaAs, RP 455/460-04 Optical Interface Universal Interface, 2.5mm adapter supplied Measurement Range RP 455/460-02 +3 to – 60dBm RP 455/460-03 +3 to –70dBm RP 455/460-04 +23 to –... -
Page 10: Accessories
4.0 Accessories Adapters AC 020 2.5mm Adapter for Optical Power Meter AC 021 1.25mm Adapter for Optical Power Meter AC 026 SC Adapter for Optical Power Meter AC 027 ST Adapter for Optical Power Meter AC 028 FC Adapter for Optical Power Meter AC 029 LC Adapter for Optical Power Meter Cleaning Kits... -
Page 11: Usb Download Instructions (Rp 460 Only)
5.0 USB Download Instructions (RP 460 only) Prior to downloading data from the RP 460, software drivers are necessary to connect the RP 460 to a Windows XP, 2000 or Vista based computer operating system. Freeware software is available by visiting www.ftdichip.com . - Page 12 2.7 Open Microsoft HyperTerminal. From the START menu select ACCESSORIES, then COMMUNICATIONS then HYPERTERMINAL. 2.8 Default Telnet Program window may open, Select NO. 2.9 The HyperTerminal window will open along with a new connection window. 2.10 Enter a name for the set up file like RP460setup then select OK. 2.11 A Connect to window will open.
- Page 13 2.25 Open the stored data file and add comments and headers as necessary for a professional records presentation. 2.26 For technical support call ODM at 603-524-8350 or email to techsupport@odm-inc.com. Our technical support team is available 8:00 am to 5:00pm EST.
-
Page 14: Contact Information
6.0 Contact Information Customer Service and Technical Assistance Phone: (603) 524-8350 FAX: (603) 524-8332 E-mail: info@odm-inc.com support@odm-inc.com Visit our website: www.ODM-INC.com Page 13 of 14...