Rockford Fosgate PUNCH P3S Installation & Operation Manual page 8

Optimized motor magnetics
with extended pole piece and
bumped vented backplate.
Custom insulated 10-AWG
nickel plated push terminals.
Rigid die-cast aluminum low profile frame.
Kevlar fiber reinforced semi-pressed paper cone
and ABS/Acrylic dustcap assembly.
Decorative aluminum trim ring.
• High modulus closed conical cone and ABS/Acrylic dustcap assembly geometry.
• Kevlar fiber reinforced semi-pressed paper cone.
• Tear & fatigue resistant poly-cotton spider.
• High density compressed half-roll sealed poly-foam surround.
• High temp voice coil with spun-laced Nomex™ insulating reinforcement collar.
• Optimized motor magnetics with extended pole and bumped vented backplate.
• Fatigue resistant and reduced strain "stitched on" flexible lead wire design.
• Multi-point high-temp/high-strength neck joint bonding technique.
• Rigid die-cast aluminum low profile frame.
• Semi-flexible PVC removable protective motor cover.
• Custom insulated/isolated compression input terminal assembly.
• Proprietary spider venting/cooling technique.
• Diamond cut cast aluminum motor cover for improved heat dissipation.
F
EATURES
Protective PVC textured magnet cover.
High-temp voice coil with spun-laced Nomex™ re-inforcment collar.
Vented spider cavity.
Tear and fatigue resistant
8
poly-cotton spider.
High density compressed
half-roll sealed
poly-foam surround