Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Rockford Fosgate PUNCH P3S
Summary of Contents for Rockford Fosgate PUNCH P3S
-
Page 2: Practice Safe Sound
Using glue and some type of sealant on all seams will ensure solid construction and prevent air leaks.The box volume will directly impact the performance of the speaker. Larger enclosures will provide flatter response and deeper bass where smaller boxes will provide a bump in the response curve and generally higher output for greater SPL. -
Page 3: Sealed/Vented Enclosures
EALED NCLOSURES NOTE: Vb is the gross volume, which is the TOTAL internal volume, before any speaker and/or port displacement. All external dimensions were based on the use of 3/4" (1.90cm) materials. NOTE: When using enclosures other than recommended, call Technical Support for correct application. -
Page 4: Physical Dimensions
(cm) C - Mounting Diameter-inch (cm) D - Mounting Depth-inch (cm) E - Overall Diameter-inch (cm) F - Screw Hole Diameter-inch (cm) G - Speaker Displacement - cu. ft. (Liter) 10" P3SD210 / P3SD410 11.0 (27.94) 0.75 (2.00) (22.86) 3.50 (8.89) -
Page 5: Specifications
There are two operational types of crossovers, passive and active. Passive crossovers (coils or inductors) are placed on the speaker leads between the amplifier and speaker. An active crossover is an electronic filter that separates the audio signal fed to different amplifiers. - Page 6 Français MISE EN GARDE : avant d'entamer l'installation, déconnectez la broche négative (-) de la batterie pour éviter tout risque de blessures, d’incendie ou de dommages à l'appareil. PRATIQUEZ UNE ÉCOUTE SANS RISQUES Une exposition continue à des niveaux de pression acoustique supérieurs à...
- Page 7 • Respuesta de bajo profundo con menos exigencia de potencia • Fabulosas para salida alta con potencia limitada Construcción de una caja Para un buen funcionamiento las paredes de la caja deben ser rigidas y no se deben doblar cuando sean sometidas a la gran presión que ejerce el funcionamiento del altavoz.
- Page 8 Protective PVC textured magnet cover. Optimized motor magnetics with extended pole piece and bumped vented backplate. Custom insulated 10-AWG nickel plated push terminals. Rigid die-cast aluminum low profile frame. Kevlar fiber reinforced semi-pressed paper cone and ABS/Acrylic dustcap assembly. Decorative aluminum trim ring. •...