Dismantling of the VFD Board
1) Loosen 7 screws "D" to remove the VFD board as shown in gure 6.
SERVICE POSITIONS
Service position A
3 - 2
D
Figure 6
DISASSEMBLY INSTRUCTIONS (SUBWOOFER)
Dismantling of the Back Panel
1) Loosen 8 screws "A" at the back panel to remove it as shown in gure 1.
Dismantling of the Power Board
1) Loosen 4 screws " B " on the top of power board as shown in gure 2.
2) With a pincers to nip this space as shown in gurer 3 and to take up the power board.
B
Figure 2
3 - 2
A
Figure 1
Figure 3