DISASSEMBLY INSTRUCTIONS (MAIN UNIT)
Dismantling of the Front Panel Assemble
1) Push the base support to the right will remove it as shown in gure 1.
2) Loosen 5 screws "A" at the back panel as shown in gure 2, and pull the front panel to remove it as shown in gure 3.
PUSH
3 - 1
Figure 1
A
Figure 2
PULL
Figure 4
Dismantling of the Middle Base
1) Loosen 5 screws "B" at the Middle Base as shown in gure 4.
Dismantling of the MAIN+IR+SW+CVBS+FCC+K1+K2+MP3 IN Board
1) Loosen 10 screws " C " on the top of MAIN+IR+SW+CVBS+FCC+K1+K2+MP3 IN board as shown in gure 5.
Figure 7
3 - 1
B
Figure 4
C
Figure 5