Operation-Basic; Initial Setup; Ir Remote Special Features - Rockford Fosgate RFX9110 Installation & Operation Manual

Rfx series source units
Table of Contents

Advertisement

Available languages

Available languages

IR Remote Special Features

23. SEEK/TRACK
radio station in TUNER mode and selects the
next/previous track in CDP/CDX mode.
24. VOL
/
– Controls VOLUME, BASS, TREBLE,
BALANCE, FADER, and SUM*.
25. SEL – Selects between VOLUME, BASS, TREBLE,
BALANCE, FADER, and SUM* modes.
26. DIR – Cycles up and down through the directory in
MP3 mode.
27 PTY – Allows priority broadcasts to interrupt all
other functions in international units only.
28. AF/TP – Allows genre music selection on
international units only.
NOTE: 1-0 BUTTONS select presets 1-10 in TUNER mode, selects tracks in CDP/CDX mode, and
selects discs in CDX mode.
IMPORTANT: The communication BUS used in Rockford Fosgate model RFX9210 is used only for CD changer
model RFX8810, and is not backward compatible with older RFX models. Rockford Fosgate
recommends connecting only the appropriate RFX models together. Rockford Fosgate does not
assume responsibility when using other manufacturers' source units with Rockford Fosgate CD
changers (or vice versa).

INITIAL SETUP

NOTE: Items shown in () refer to remote control functions.
DETACHABLE FACEPLATE
The faceplate is detachable as a theft deterrent.
To Detach the Faceplate:
1. Press the Open Button to cause the faceplate to slide down and
forward.
2. Press the release button on the bottom front edge of the
faceplate and slide the faceplate away from the unit.
3. The faceplate bracket will automatically close after 5 seconds.
To Attach the Faceplate
1. Make sure that the faceplate bracket is in the closed position.
2. Press the faceplate against the front of the unit until it clicks into place.
CAUTION: Do not attempt to attach the faceplate to the faceplate bracket when the
!
bracket is in the open position. You may cause damage to the
mechanism that may void your warranty
3. If desired, the faceplate can be permanently attached by affixing it to the bracket with the
screw provided.
/
– Selects the next/previous
S
U
F
OURCE
NIT
EATURES
O
– B
PERATION
ASIC
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rfx9110rRfx9210Rfx9210gRfx9210rRfx9110g

Table of Contents