Sound Parameters - Deluge Synthstrom Audible Instruction Manual

In kit tracks, each sound / row has a different colour. The colour of an individual row may be
altered by holding the shift button, holding the audition pad (far-right) for the row, and turning the
▼▲ knob.
For kit tracks, the sounds / rows may be re-ordered. To do this, hold down the audition pad
(far-right) for the row, and hold down the ▼▲ encoder while turning it. Scrolling will occur, but
the selected row will move along with the scrolling (i.e. it will appear to stay still while the other
rows scroll past it).
New sounds (samples from the SD card in the most basic case) may be added to an existing kit,
too. ​ S ee the corresponding section​

Sound parameters

of the synth.
For ​ k it tracks​ , by default the ​ p arameter knobs ​ affect just the sound of the currently ​ s elected
sound. To select a sound, tap the audition pad (far-right) for that row. If you don't wish for the
sound to in fact be sounded audibly while you do this, hold down the shift button first. The
currently selected sound is indicated with its audition pad dimly illuminated.
.
The ​ p arameter knobs ​ (the two gold knobs) control
parameters of the synthesizer or sampler engine. Each
has a level-meter to its left, indicating the current value
of the parameter it controls. Which parameters the
knobs control (their ​ f unction ​ ) can be quickly switched
by the row of 8 buttons indicating options such as
volume/pan, attack/release, etc.
For synth tracks, the ​ p arameter knobs ​ affect the sound