HP L6015tm Installation Instructions

Installation Instructions
HP Retail Integrated
2x20 Display
L6015tm RP2 2000 RP7 7800
L6017tm
RP2 2030 RP7 7100
Copyright © 2014 Hewlett-Packard Development Company, L.P. The
information contained herein is subject to change without notice.
Printed in
First Edition: April 2014
*765300-001*
765300-001
NOTE: Refer to the HP L6015tm and L6017tm Retail Touch Monitors
User Guide, the HP RP7 Retail System Model 7800 Hardware
Reference Guide, the HP RP7 Retail System Model 7100 Hardware
Reference Guide, or the HP RP2 Retail System Hardware Reference
Guide at www.hp.com for detailed instructions on installing USB
modules.
Before You Begin
Before installing the 2x20 display, be sure to power off the system and
disconnect the power cord from the power outlet.
WARNING! To avoid the risk of serious injury or damage to the
system, ensure that the power cord is unplugged from the electrical
outlet at the wall before installing the 2x20 display. Failure to do so
may expose you to the risk of electric shock.
NOTE: For regulatory and safety notices, refer to the Product
Notices included with your product.
Configuring the Display
To configure the 2x20 display, refer to the HP Point of Sale Configuration
Guide (available in English only). The guide is located with the
documentation on your retail computer and at www.hp.com. To access
the guide on the retail computer:
• In Microsoft Windows XP or Windows Embedded POSReady 2009,
select Start > All Programs > HP Point of Sale Information.
• In Microsoft Windows 7, Windows Embedded POSReady 7, Windows
8.x, or Industry 8.1, select Start > HP Point of Sale Information.
Check www.hp.com/support for updated software or documentation that
became available between the time your product was manufactured and
delivered to you.
HP L6015tm and L6017tm Retail Touch Monitors
HP RP7 Retail System Model 7800
NOTE: Inserting the screws is a
required step.
NOTE: Inserting the screws is a
required step.
NOTE: This step may not be necessary
if a connector cover is not installed in
the USB port.