Advertisement
After you take the device out of its box, remember to remove the clear plastic from
around it so that the ventilation holes are not blocked.
Step 1
Connecting the cables
Follow the steps below for the cabling of your device.
1.
Connect the 12V power adapter included in the box to the power
port of your router and plug it into the wall outlet.
2.
Turn on the Air 4450 by setting the On/Off switch to the "|"
position.
3.
Connect the Ethernet cable provided from one of the LAN ports of
your Air 4450 to one of the Ethernet ports of your ADSL modem or a
Switch on your wired network.
* Please see the next page for the installation diagram.
Advertisement
