Content 1. QUICK VIEW..............................3 1.1. A ..............................3 PPEARANCE 2. QUICK INSTALL...............................4 2.1. I SIM..............................4 NSTALL 2.2. C LAN..............................4 ONNECT 2.3. L ............................5 OGIN WEB SERVER 3. QUICK CONFIGURE............................6 3.1. C ............................6 ELLULAR SETTINGS 3.2. LAN ..............................6 SETTINGS 3.3 WLAN ...............................7 SETTINGS 3.4 S DHCP..............................7...
1. Quick view 1.1. Appearance (1) Dimension 89.5 SIM SLOT Device overview • Housing:Metal plate case • D/W:102.5×73.5×24.5mm / About 350g • Mounting: Removable wall‐fixing • Power plug DIA inner2.1mm / outer 5.5mm panels or Din Rail mounting • Accessories: Power adaptor DC 12V/1.5A, SIM Locker: metal SIM locker 1 meter long Ethernet cable, Cell antenna ( WiFi a •...
(2) Converting cable 2. Quick Install 2.1. Install SIM Open the SIM locker and insert the SIM card after power off. 2.2. Connect LAN Connect computer to LAN port and set IP address. Default Local IP: 192.168.1.1 Default DHCP: 192.168.1.2~ 192.168.1.53 Sub‐mask: 255.255.255.0 Default Gateway: 192.168.1.1...
Access web server via router IP http://192.168.1.1, and the default user name and password are admin. 3. Quick configure 3.1. Cellular settings Cellular is the default WAN connection. Usually AcuMR2 will automatically configure mobile network. If not, plea se set the correct cellular parameters. APN: Please check with the local ISP.
3.2. LAN settings Note: Router IP, DHCP IP and gateway address are required in same network segment. • 2 RJ45 ports design, 1 fixed LAN and 1 optional port for WAN, LAN or serial port. •...
3.3 WLAN settings WLAN feature is only for models with WIFI. MR2x supports 802.11 b/g/n 2.4GHz WiFi 1T1R, with AP, AP+WDS, wireless client, wireless Ethernet bridge, WDS working mode. After enabling WLAN, if requiring authentication for WIFI users, please create password in security. MR2x can support WPA, wpa‐psk, wpa2, wpa2‐psk, wpa‐psk/wpa2‐psk, wpa/wpa2 and Radius Encryption.
3.6. Captive portal This feature is used for pushing service of advertisement. When clients access Internet through AcuMR2, the captive portal will push a web page for authenticating. After authentication, the clients can continue the Internet connection. Logged timeout: the max Internet connection time clients can use Idle timeout: the interval time between two times pushing advertisement Ignore LAN:...
3.7.2 Upgrade portal files The portal version AcuMR2 was design with customer storage. Because of the limited space, there’s only 2.2M for saving small portal pages. The administrator can upload new portal files from the web server or remote ezM2M platform. The administrator can edit new portal pages in the file “splash_en”.
3.9.2. System password AcuMR2 routers can support HTTP and HTTPS network protocols. For security, sometimes, especially the remote access will be required to use HTTPS protocol to access the router management. At default both the user name...
Restore default configuration: restore factory default, or erase all data in NVRAM memory. 3.9.5. Logging AcuMR2 routers can support local logs and remote logs. The local logs will be deleted when power off. So to get the all logs, please set the router to export logs automatically.
3.9.6. Upgrade AcuMR2 routers can support web update, TFTP update and remote update. Note: Please keep the power supply during upgrading firmware; otherwise the system maybe damaged. Any upgrade may collapse the flash, so if the router works fine, please do no upgrade.
3.10.2. Ping 3.10.3. Trace Route With the unique set of products, Acura Embedded Systems remains committed to its goal of providing trouble-free and customer-friendly service. A special customer service unit has been set up specifically to cater to our esteemed customers' needs.
Need help?
Do you have a question about the AcuMR2 and is the answer not in the manual?
Questions and answers