Programming your vessel data
After the device is successfully connected with the Configuration
Tool, click on the "Configuration" tab. You will require the following
information in order to configure the device:
•
Vessel´s name: limited to 20 characters
•
Call sign: limited to 7 characters
•
MMSI: Enter your MMSI (Maritime Mobile Service Identity) number
•
Vessel type: choose your ship type from the drop down list
•
Ship dimensions: Enter the vessel dimensions in relation to the posi-
tion of your GPS antenna
•
Configure NMEA 0183 Baud Rate: Baud rate of NMEA 0183 # 1 and
NMEA 0183 # 2 can be configured here to 38400, 9600 or 4800.
Warning:
sure to enter the correct MMSI number, as it cannot be corrected
if entered incorrectly.
Configuring your AIS transponder |
The MMSI number can only be entered once. Be
Static data setting
V3100 User Manual
| 23