Simrad V3100 User Manual page 20

20 |
Connecting power cable
Connect the V3100 to vessel´s power source as illustrated below.
The device requires a 12V or 24V DC power supply (9.6 to 31.2V)
capable of supplying 2A peak current @12V DC. Always use a
minimum 3A fuse panel before connecting directly to battery or
power supply. Power on the power source will turn on the device
unit automatically.
12pin
V3100´s power cables are marked with bullet connectors.
Power and alarm connections
Installation | V3100 User Manual
8pin
Black Power GND
Yellow
Power GND
Brown
DC 12/24V
DC 12/24V
White
Blue Normally Open
Red Common
Orange
Normally Close
Green Frame GND
Power Supply -
Black Bullet Connector
Power Supply +
Red Bullet Connector
External Alarm