Sealey VSCANP Instructions Manual
Sealey VSCANP Instructions Manual

Sealey VSCANP Instructions Manual

V-scan pro multi-manufacturer diagnostic tool

Advertisement

To prevent personal injury or damage to vehicles and/or the
diagnostic tool, read this instruction manual first and observe the
following safety precautions at a minimum whenever working on a
vehicle:
Always perform automotive testing in a safe environment.
Wear safety eye protection that meets ANSI standards.
Keep clothing, hair, hands, tools, test equipment, etc. away from all
moving or hot engine parts.
Operate the vehicle in a well-ventilated work area: Exhaust gases
are poisonous.
Put blocks in front of the drive wheels and never leave the vehicle
unattended while running tests.
Use extreme caution when working around the ignition coils,
ignition wires and spark plugs. These components create
hazardous voltages when the engine is running.
Put the transmission in PARK (for automatic transmission) or
NEUTRAL (for manual transmission) and ensure that the
handbrake is applied.
Refer to instructions
1

Advertisement

Table of Contents
loading

Summary of Contents for Sealey VSCANP

  • Page 1 Refer to instructions To prevent personal injury or damage to vehicles and/or the diagnostic tool, read this instruction manual first and observe the following safety precautions at a minimum whenever working on a vehicle:  Always perform automotive testing in a safe environment. ...
  • Page 2  Keep the scan tool dry, clean and free from oil/water or grease. Use a mild detergent, DO NOT use solvent or abrasive cleaners. Jack Sealey Limited Original Language Version VSCANP Issue:1 03/01/18...
  • Page 3: Table Of Contents

    Chapter I Product Introduction................ 5 1.2 Care and Maintenance..................5 1.2.1 Storage....................5 1.2.2 Tablet and VCI protection..............6 Chapter II V-Scan Pro Tablet................7 2.1 V-Scan Pro Tablet Overview...............9 2.2 V-Scan Pro Tablet Specifications............. 9 Chapter III V-Scan Pro VCI................10 3.1 V-Scan Pro VCI Overview................10 3.2 V-Scan Pro VCI Specifications..............
  • Page 4 4.6.4. Self Test....................17 4.6.5. Activation.....................18 4.6.6. About Us..................... 19 4.6.7. System Settings................. 19 Chapter V Vehicle Diagnosis................20 5.1 Connection method of tablet and VCI........... 20 5.2 Vehicle Diagnosis..................23 Chapter VI Update & Activation..............27 6.1 Update......................27 6.2 How to Renew Update Subscription............
  • Page 5: Chapter I Product Introduction

    Chapter I Product Introduction The V-Scan Pro diagnostic tool is a fast wireless multitasking operating system. Includes the most extensive coverage of OE-level diagnostics, allowing independent garages to provide a complete diagnostic service for cars, SUV’s and vans. Software features: •...
  • Page 6: Tablet And Vci Protection

    with soft cloth. 1.2.2 Tablet and VCI protection 1) Be careful to plug and unplug the main cable and diagnostic connector. Tighten the screws before operation to avoid unexpected disconnecting and/or damage to the diagnostic port.
  • Page 7: Chapter Ii V-Scan Pro Tablet

    Chapter II V-Scan Pro Tablet 2.1 V-Scan Pro Tablet Overview Front View Top & Bottom...
  • Page 8 Side View Back View...
  • Page 9: V-Scan Pro Tablet Overview

    2.1 V-Scan Pro Tablet Overview Front camera HDMI interface Charging indicator USB Micro-B port Light-sensitive sensor USB A port (Not in use) Charging socket Power switch SIM card slot (Not In Use) Volume + TF card slot (Not In Use) Volume - Speaker (Not in use)
  • Page 10: Chapter Iii V-Scan Pro Vci

    Chapter III V-Scan Pro VCI 3.1 V-Scan Pro VCI Overview ① On when powered on (connected to Power indicator vehicle) ② Flashes when communicating with Diagnostic indicator ③ vehicle ④ Wireless indicator On when connected to a tablet USB indicator On when connected to a tablet...
  • Page 11: V-Scan Pro Vci Specifications

    ⑤ Connect to main test cable; Connect the DB15 interface other end of cable to vehicle ⑥ USB interface (B Connect with tablet or upgrade VCI box shape) 3.2 V-Scan Pro VCI Specifications Processor Cortex-M3 Micro-controller Frequency 100MHz Processor model LPC1768 Flash memory 512KB...
  • Page 12: Chapter Iv V-Scan Pro Tablet Display Screens

    Chapter IV V-Scan Pro Tablet Display Screens Start up the tablet (press and hold power switch for 5 seconds). Open the V-Scan Pro app: 4.1 Vehicle Diagnosis Screen Open the diagnosis menu to begin vehicle diagnostics. Here, you can select from a wide range of different manufacturers from different continents.
  • Page 13: Vci Connection Screen

    4.2 VCI Connection Screen 1. Wireless. 2. USB. (USB connection lead is not supplied. Will require a USB-A male to USB-B male lead). This is an alternative method of connecting the VCI to tablet. Would only be used if the Bluetooth function isn’t working or operator would rather not use.
  • Page 14: Data Management Screen

    4.3 Data Management Screen Storage location for screen shots, test logs, vehicle software version, etc.; for user’s reference. 4.4 Reference Guide Screen Maintenance Help: Includes diagnostic/repair information for some vehicles as a reference guide. Fault Code: Built-in fault code library, allowing the user to search a code, giving useful information.
  • Page 15: Update Screen

    4.5 Update Screen When connected to the internet via Wi-Fi or cable interface, update to the latest diagnostic software.
  • Page 16: Settings Screens

    4.6 Settings Screens Set Language, Units, User Info, Self-Test, Activation, Push Notifications, About Us and other functions. 4.6.1. Language Settings The V-Scan Pro supports multiple languages. 4.6.2. Unit Set the live data units in the diagnostic software. You can select Metric or English as needed.
  • Page 17: User Info

    4.6.3. User Info Set your personal information: name, phone, email, address, company name.
  • Page 18: Self Test

    4.6.4. Self Test You can check the V-Scan Pro for open or short circuits. 4.6.5. Activation The V-Scan Pro will need to be activated when received. This will start your 2 year standard subscription for updates to the software.
  • Page 19: About Us

    4.6.6. About Us Provides information on the operating system and software versions. Also provides activation state and product S/N. (Serial Number) 4.6.7. System Settings Opens up the tablets settings menu.
  • Page 20: Chapter V Vehicle Diagnosis

    Chapter V Vehicle Diagnosis 5.1 Connection method of tablet and VCI Connect the VCI box to the vehicle to be diagnosed via the main test cable and diagnostic connector. Turn on the tablet, enter VCI connection. It can be connected via Bluetooth and USB cable.
  • Page 21 2. The ID for the VCI can then be found on the device list. Click to Connect.
  • Page 22 3. Click Pair. 4. After the pairing is successful, the VCI wireless (Bluetooth) indicator on the tablet and on the VCI will illuminate. This indicates a successful connection. When connected. The V-Scan Pro will display (please see image below). It will automatically pair next time you use it, and you do not need to set-up again.
  • Page 23: Vehicle Diagnosis

    5.2 Vehicle Diagnosis The following is an introduction to the V-Scan Pro Diagnosis. 1. Enter the Diagnosis menu. 2. Select continent and manufacturer.
  • Page 24 2.1 You can also use the search function to find the manufacturer. 3. You can select automatic scanning or Manual selection. Automatic Scanning: This will load the ECU’s the diagnostic tool has identified and can communicate with. Manual Selection System: This will show a list of ECU’s for you to choose from.
  • Page 25 4. Choose ECU for testing. 5. When you enter into the ECU that you want to test you will have a number of options. These include fault code reading, clearing, live data, actuation tests and special functions.
  • Page 26 6. Fault code 7. Live Data...
  • Page 27: Chapter Vi Update & Activation

    Chapter VI Update & Activation After purchasing the Sealey V-Scan Pro you are advised to activate the machine immediately, regularly update it and complete the personal information. 6.1 Update 1. Click Update. 2. Click the refresh icon on the top right to check for latest updates.
  • Page 28 3. Make sure software is on the latest version. The vehicle database will keep the tool up to date with the latest vehicles.
  • Page 29: How To Renew Update Subscription

    6.2 How to Renew Update Subscription After the initial subscription has expired, it can be renewed by purchasing directly from Sealey on 01284757500. Sealey will just need the serial number of the V-Scan Pro. Activation of the new subscription will take 24 hours.
  • Page 30 3. Once scanned, the activation code will be displayed. 4. Fill in the activation code to the tablet. Click ‘Complete’ to back to the activation interface.
  • Page 31 5. Click ‘Activation.’ 6. Activation is successful. If you are prompted ‘Activation Failed’, start again.
  • Page 32 7. After the activation is successful, you can see the status bar is displayed as ‘Activated.’...
  • Page 34: Chapter Viii Parts Information

    Chapter VIII Parts Information...
  • Page 35 VSCANP.01 Tablet VSCANP.02 VCI (Black Box) VSCANP.03 Self-Diagnosis Plug VSCANP.04 OBD 16 Pin VSCANP.05 Battery Clip VSCANP.06 Aux Vehicle Socket VSCANP.07 VCI Main Cable VSCANP.08 BMC (not shown) VSCANP.09 Mains Charger VSCANP.10 Data Cable (USB to micro USB 1mtr & 12.5cm)

Table of Contents