Advertisement
To access panel programming
+ Installation - Panel (Basic) or Panel
(Enhanced) enter the installer code. You will be presented with the below.
Basic screen
Enhanced screen
In Basic programming mode data entry is as per the LED/ICON codepads. Enter the
*.
address and #. The data at that location will be displayed. Enter new data press
The (X) button provides a backspace function.
In Enhanced programming mode separate windows are provided to display address
and data. You can move between these windows by touch selection. Entering an
address followed by the Enter button will display the data at that address. A new data
entry may then be made ( note position of the green window outline ) followed by the
enter key.The address locations may be stepped through one at a time by using the
or
buttons. When programming is complete touch the HOME button. There
is no requirement to enter the familiar 960 away command with the Touch Classic.
Diagnostics
From the settings menu touch Diagnostics and the installer will be presented with all
of the usual test functions as well as the Alarm Memory. The Alarm memory event
recall process steps through events as per the standard codepad however each is
displayed in numbered order on the screen.
The Walk Test function "ticks" off zones as they are tripped and moves them to the
bottom of the screen. The horn beep function is retained.
Warranty
THREE Years� �
Advertisement
