Honda WT30X Owner's Manual page 35

12/01/20 10:12:23 32YG0620_034
5. Servicing the pump casing
After each use, clean the inside of the pump casing using the following
procedure:
1. Remove the pump drain plug
from the pump cover using the
wrench to drain the water inside.
2. Loosen the pump cover knobs
using the wrench.
3. Remove the pump cover and the volute case from the pump casing,
and remove any debris from pump casing and volute case.
32
KNOBS
PUMP CASING
PUMP DRAIN PLUG
WRENCH
O-RING
VOLUTE CASE
PUMP COVER
WRENCH
KNOBS