Advertisement
QUI CK START GU ID E
System Requirements
Type
Computer/Processor
Memory
Hard Disk
Display
Software Environment
User Permissions
1
Getting Started
Administrative Privileges
You must have Administrator privileges to complete the Installation and Startup procedures. To verify you are an
Administrator on the system:
1. Go to Control Panel > User Accounts > Manage User Accounts.
2. Under Users for this computer, locate your User Name and verify the associated Group column displays
Administrators.
Initial Setup
1. Plug in the CP1000 Desktop Encoder to a USB port on your PC.
2. Plug in the HID USB Flash Drive to a 2
3. From the USB flash drive, install the Asure_ID_Setup application file located in the Install folder. Follow the
Installation Wizard to install the application. If prompted, allow the application to make changes to the computer.
4. Launch the Asure ID application and perform the configuration tasks.
Note: Log on credentials: Username: admin Password: admin.
Note: A Windows error may appear indicating that not all of the all drivers were installed correctly. This is expected
as the encoder has a chip that appears as a smart card and if Smart Card PnP is enabled, Windows will try to
locate a driver for this chip which cannot be located.
2
Initial Configuration
Change Default Administrative Keys
It is important to change the default Administrative Keys during initial setup for security reasons.
1. During the initial installation, the Unsecured Encoder! window will appear, click Yes to change the keys.
h id g l o b a l.co m
Microsoft Windows 7 (32-bit and 64-bit)
Microsoft Windows 8 (32-bit & 64-bit)
Microsoft Windows 8.1
Microsoft Windows 10 (32-bit & 64-bit)
300 MHz or higher Pentium-compatible CPU
USB ports
64-bit systems: 2 GB of RAM
32-bit systems: 1 GB of RAM or higher
500 MB free space
VGA or higher resolution monitor
Latest Operating System service pack
Local machine administrative rights for installation and secure database administration
Internet access for license activation (or phone for phone activation)
USB port on your PC.
nd
An ASSA ABLOY Group brand
iCLASS SE
CP1000 Desktop Encoder
Advertisement
