Installation - Dometic R31 SERIES Installation And Operating Manual

RANGE AND SLIDE-IN

5 INSTALLATION

 ELECTRICAL SHOCK, FIRE, EXPLOSION, AND/OR CARBON MONOXIDE HAZARD. Failure to
obey the warnings or installation instructions in this section could result in property damage, death, or serious
injury:
• The range or slide-in must be completely separated and/or sealed from other air moving or air-consuming
devices such as, but not limited to, furnaces, microwave ovens, clothes dryers, cooling fans, and doors or
drawers in common cabinets. Failure to do so can affect the appliance(s) combustion air supply by creating
either a negative or positive draft.
• Do not use matches, candles, or other sources of ignition to test fittings and gas lines for leaks.
• Do not use a ventilation system that blows air downward toward the range or slide-in, as ignition and
combustion problems with the gas cooking appliance could occur.
• Direct current electrical supply conductors must be provided with strain relief at the range or slide-in.
5.1 Installing The Range Or Slide-In
STEP 1
Range
• Remove the endcaps and place the range or
slide-in within the cutout.
• Verify the range or slide-in is level on all sides.
I
If using a recessed bi-fold cover, the endcaps
remain attached to the range or slide-in.
STEP 3
• Connect all gas connections on the range or
slide-in and tighten according to the appropriate
RV and gas codes.
I
All openings in the cabinetry around the gas
line must be closed at the time of installation.
EN
STEP 2
Endcap
Control
Panel
Counter
• Remove the grate and pull the range or slide-in
• Lift up the range or slide-in top.
I
STEP 4
Gas Connection
• Secure the range or slide-in by placing wood
Grate
forward.
Do not remove the range or slide-in top by
pulling on the grate.
Screw
screws (not provided) through the designated holes
and into the cabinet. Do not force the mounting
flanges to bend.
Range
Top
Screw
6