Crestron CEN-RVS-R210 Quick Start Manual

CEN-RVS-R210
Your RoomView server has arrived!
®
The Crestron RoomView ® server provides a simple and effective way
to add RoomView to your environment.
1. Carefully open the box the server was shipped in and unpack the
unit and the rest of the contents.
2. Inspect everything that came in the box to ensure that nothing is
damaged or missing. You should have:
● Your RoomView Rack Server (a one rack unit Dell Server)
● Power cord, software and documentation from Dell
● Dell ReadyRails TM
● A CD with all of your Crestron software and documentation
1
QUICKSTART DOC. 7118B (2029344) 01.11
RoomView Server
®
3. Review all of the documentation.
4. Attach the included ReadyRails static rail system to your rack
system.
5. Slide the server into the ReadyRails until it clicks into place.
NOTE: The operating temperature of the rack should be between 50°
to 95°F (10° to 35°C) with 20 to 80% relative humidity
(non-condensing). Temperature gradation should be limited to
50°F (10°C) per hour and humidity gradation should be limited to
10% per hour.
6. Attach a monitor, mouse and network cable (not provided).
7. Connect the power cable to the server.
www.crestron.com
©2011 Specifications subject to
change without notice
!
888.273.7876 201.767.3400
All brand names, product names, and trademarks
are the property of their respective owners.
8. Secure the power cable to avoid tangled wires and possible
disconnection.
9. Plug the power cable into a suitably powered and grounded
electrical supply. An uninterruptable power supply (UPS) or power
distribution unit is recommended.
10. Press the power button on the server as well as the power button
on the attached monitor.
11. Download and install the latest Windows updates.
®
12. To attach the server to your domain, follow steps 1 through 9 of
this TechNet article:
CAUTION: Changing the name of the RoomView server may cause
the installed Microsoft SQL Server to stop running.
® ®
NOTE: The following login credentials are required: The Windows
username is: administrator, the password is Roomview1. The SQL
administrator username is: sa, the password is Roomview1. The
RoomView username is: Admin, the password is Admin.