Advertisement
Quick Links
DCM50
MF Drivers
160 W continuous program power capacity
Neodymium magnet assembly
2" horn throat diameter
400 – 10000 Hz response
108.5 dB sensitivity
Specifications
Throat Diameter (1)
Nominal Impedance
Minimum Impedance
Nominal Power Handling (2)
Continuous Power Handling (3)
Sensitivity (1W/1m) (4)
Frequency Range
Recommended Crossover (5)
Voice Coil Diameter
Winding Material
Inductance
Diaphragm Material
Flux Density
Mounting and Shipping Info
Four M6 holes 90° on 102 mm
(4 in) diameter
Overall Diameter
152 mm (6 in)
Depth
108 mm (4.25 in)
Net Weight
Shipping Weight
3.4 kg (7.5 lb)
Shipping Box
170x170x140 mm
(6.7x6.7x5.5 in)
1 Driver mounted on 320 Hz exponential horn
2 2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance.
3 Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
5 12 dB/oct. or higher slope high-pass filter.
50 mm (2 in)
8 ohm
8 ohm
80 W
160 W
108.5 dB
0.4 -10 kHz
400 Hz
51 mm (2 in)
Aluminium
0.18 mH
Composite
2.1 T
3.2 kg (7 lb)
Advertisement
