Indicator, Beeper And Buttons - Royal PT-300 User Manual

Indicator, beeper and buttons

ERROR Indicator BATTERY STATUS
(Red) Indicator (Green)
OFF
Blinking
OFF
OFF
Long press the power button for 3 seconds.
Press the POWER button and FUNC button simultaneously, wait for the green lights light
in turn, then release the POWER button firstly. The red light and blue light lights up in turn,
after the blue light is off, release the FUNC button; red light is off, the printer motor will
vibrate.
To feed paper manually, press the FEED button.
Press the FEED button and the POWER button simultaneously, wait for all the lights are
bright, then release the POWER button firstly, wait for STATUS indicator (blue light) is off,
then release the FEED button.
Press the FEED button and the POWER button simultaneously, wait for all the lights are
bright, then release the POWER button firstly; after the blue light and red light is off in
turn, then release the FEED button, meanwhile the printer prints out "Hexadecimal Dump"
page, then printer is changed to Dump mode.
Turn on the printer, press the function button.
STATUS Indicator (Blue)
OFF
ON
ON
ON
ROYAL Thermal Printer PT-300
Beeper
OFF
OFF
OFF
ON
Status
No Printer power off.
Printer power on, but
Yes
out of paper.
Printer is powered on
No and in normal print
mode.
Bluetooth/Wi-Fi
No
connected.
Printer power ON/OFF.
Factory data reset
Paper feed
Print Self-test page
Hexadecimal Dumping
Interface information
7