Set Up; Battery Installation; Paper Roll Installation - Royal PT-300 User Manual

SET UP

Battery installation

1.
1. Unpack the battery.
2. Install the battery as pictured, following the direction of the arrow.
3. Push the battery into the slot until it snaps into place.
NOTE: The printer cannot print without the battery.

Paper roll installation

1.
1. Open the top cover as shown in the picture.
2. Install the paper roll as shown in the picture, following the direction
of the arrow.
3. Pull the edge of the paper 5mm through the outside of the slot.
4. Close the top cover.
NOTE: In order to maintain a high print quality and extend the life of
the device, we recommend using ROYAL brand 2 1/4" (57mm) paper
roll, Part # 013127.
2.
2.
ROYAL Thermal Printer PT-300
3.
3. 4.
5