Panasonic KX-HN3001 Operating Instructions Manual page 26

Programming
Smart notification
By using the smart notification feature, you
can specify how the monitor unit notifies you
when motion or sound is detected by the
camera unit, and configure motion detection to
match the size of your baby. Depending on
the settings, the monitor unit can notify you by
lighting the smart LED indicator (page 16),
displaying a message, and playing a chime.
Important:
R Depending on factors such as the usage
environment, the monitor unit may not be
able to notify you of sensor detections.
Note:
R Notifications continue for 1 minute. You can
stop the notification by pressing MOKN.
Configuring sound notifications
You can specify how the monitor unit notifies
you when sound is detected, or turn off
notifications.
1
MMENUN
2
MbN: "Smart Notification" a MOKN
3
MbN: "Sound Notification" a MOKN
4
MbN: Select the desired setting.
R To turn off sound notifications:
MbN: "OFF"
5
MOKN a MMENUN repeatedly to exit.
Configuring motion notifications
You can specify how the monitor unit notifies
you when motion is detected, or turn off
notifications.
1
MMENUN
2
MbN: "Smart Notification" a MOKN
3
MbN: "Motion Notification" a MOKN
4
MbN: Select the desired setting.
R To turn off motion notifications:
MbN: "OFF"
5
MOKN a MMENUN repeatedly to exit.
For assistance, please visit http://shop.panasonic.com/support
26
Auto lullaby
You can configure lullabies to be played
automatically from the camera unit when
sound is detected.
Note:
R Make sure to check the camera unit's
speaker volume before playing lullabies
(page 20).
R Auto lullaby does not function during the
following.
– while using or for 5 seconds after using
the pan/tilt
– while talking to the camera unit
– while configuring lullabies to be played
Configuring the sound settings
You can specify which lullaby is played when
sound is detected, or turn lullabies off.
1
MMENUN
2
MbN: "Auto Lullaby" a MOKN
3
MbN: "Sound List" a MOKN
4
MbN: Select the desired lullaby.
R To turn off lullabies:
MbN: "OFF"
5
MOKN a MMENUN repeatedly to exit.
Note:
R If the monitor unit is turned off while
selecting lullabies, the lullaby will continue
to play from the camera unit for the
specified time.
Configuring the sound detection level
You can adjust the level at which sound is
detected. Increase or decrease the detection
level needed to trigger the sound sensor.
1
MMENUN
2
MbN: "Auto Lullaby" a MOKN
3
MbN: "Sound Detect Level"
4
MbN: Select the desired setting. a MOKN
a MMENUN repeatedly to exit.
*1 This feature can only be selected when a
lullaby is selected for "Sound List"
(page 26).
*1
a MOKN