Playing/Canceling Lullabies Manually; Selecting Camera Units/Using Auto Scan - Panasonic KX-HN3001 Operating Instructions Manual

4
MbN: "Alert Range" a MOKN
5
M N: "Lower Limit"
6
MbN: Specify the desired temperature.
7
M N: "Upper Limit"
8
MbN: Specify the desired temperature.
9
MOKN a MMENUN repeatedly to exit.
Playing/canceling lullabies
manually
You can select from a range of lullabies and
manually play them from the camera unit, or
cancel them.
Note:
R Make sure to check the camera unit's
speaker volume before playing lullabies
(page 20).
R The auto lullaby feature can be used to play
lullabies automatically (page 26).
Selecting a lullaby
1
MMENUN
2
MbN: "Lullaby" a MOKN
3
MbN: "Sound List" a MOKN
4
MbN: Select the desired lullaby.
R To cancel a lullaby:
MbN: "OFF"
5
MOKN a MMENUN repeatedly to exit.
Note:
R Lullabies can also be canceled by pressing
M N on the camera unit.
R If the monitor unit is turned off while
selecting lullabies, the lullaby will continue
to play from camera unit for the specified
time.
Selecting a lullaby play time
You can specify the time that lullabies play for.
1
MMENUN
2
MbN: "Lullaby" a MOKN
3
MbN: "Play Time" a MOKN
For assistance, please visit http://shop.panasonic.com/support
Using the Baby Monitor
4
MbN: Select the desired play time.
5
MOKN a MMENUN repeatedly to exit.
Selecting camera units/
using auto scan
If there are multiple camera units registered to
the monitor unit, you can select which camera
unit's images to view, and also use auto scan.
Auto scan automatically switches images from
each camera unit every 10 seconds. See
page 28 for information on adding camera
units.
1
MMENUN
2
MbN: "Camera Select" a MOKN
3
To select camera units:
M N: Select the desired camera unit.
To select auto scan:
M N:
4
MOKN
Note:
R When a camera unit is selected, sound
detection, motion detection, and
temperature detection notifications are only
received from the selected camera unit.
Notifications from other camera units will
not be received.
21