Table of Contents
Advertisement
ATX motherboard
interfaces
PS/2
RS 232
COM1 - COM2
USB1 – USB4
LAN1
LAN2
Sound
DVI-I out
DVI-D out
DisplayPort
Type plate
C6240
Interfaces C6240-0050
X105
X104
X103
X119
PS/2 connections
The upper PS/2 connector (X104) allows a PS/2 mouse to be used, while a
PC keyboard can be connected to the lower PS/2 connector (X103).
Serial interfaces
The basic version of the Industrial PC has two serial interfaces,
COM1 (X105) and COM2, using the type RS 232, which are each brought
to a 9 pin SUB-D plug connector. The interface COM2 is located in the
upper part of the first slot right beside the ATX-slot.
USB interfaces
The four USB interfaces (X108 – X111) are used to connect peripheral
devices with USB 2.0 connections.
Network connection
The RJ-45 connector (X112) allows the PC to be connected to a
10/100/1000BASE-T Local Area Network (LAN).
The RJ-45 connector (X113) allows the PC to be connected to a
10/100/1000BASE-T Local Area Network (LAN).
Sound-On-Board
The Industrial PC has a on-board-interface with the following connectors:
Line In (X116), Line Out (X115) and Microphone jack (X114).
DVI-I (Digital Visual Interface)
The DVI connection (X117) is used for transferring the video signal. DVI-I
standard is supported.
DVI-D (Digital Visual Interface)
The DVI connection (X118) is used for transferring the video signal. DVI-D
standard is supported.
DisplayPort
The DisplayPort (X119) is used for transferring the video signal.
Additional plug-in cards (optional)
There is a type plate on the top of the Industrial PC which provides
information about the hardware configuration of the Industrial PC at the
time it was supplied.
Product Description
X117
X112
X113
X118
X109
X111
X108
X110
X116
X115
X114
9
Advertisement
Table of Contents
