Ipcamdata iSmartViewPlus Quick Installation Manual

iSmartViewPro
iSmartViewPlus
Quick Installation Guide
iSmartViewPro iSmartViewPlus
(ios)
(Anadroid)
Quick Installation Guide
Tips:
This is Quick Installation Guide, for more detailed instruction,
http://cd.ipcamdata.com
please download it by this link: .
connections
Power adapter
IP camera
RESET
This is the Quick Installation Guide, for more detailed manual,
please download it from this link: http://cd.ipcamdata.com.
• Plug the camera in with the included power supply
• Connect your phone to your WiFi
• Connect the camera to your wifi router with ethernet cable
1. connections
2. Download APP
Tips:
3. Connect to network
• We suggest you to use the included power supply to
avoid any damage of the camera.
•You can find the camera ID and QR code in the label on
the camera.
X Series IP Camera
Username: admin
Password: 123456
DID: VIEW-XXXXXX-CEOWH
DDNS: xxxxxxx.nwsvr1.com
Camera ID & QR Code label
ADSL
Status LED
Router Solid Light Blinking Slowly
OUT IN
Download APP (Android)
1.Go to the Google Play to search and download,if you are
Andriod "iSmartViewPro" APP to your smart phone or tablet.
X Series IP Camera
Username: admin
Password: 123456
iSmartViewPro icon
DID: VIEW-XXXXXX-CEOWH
DDNS: xxxxxxx.nwsvr1.com
2.Or scan below QR code to get the APP.
DDNS QR Code
Camera ID(DID)
Factory Default Accout Info
Connect to network
1. Click on "Add Camera".
Status LED
1
Blinking Quickly
wifi
wifi
2. Click on "Add Camera via WiFi mode".
2
1) Please check the blue light on the camera, if it is flashing
slowly, please tap "Blue ligh t is flashing slowly", and Scan the
QR code in the label on the camera, and name the camera.
Then click on "Next" (Please don't change the user name and
password here, please use the default one "admin"and
"123456")
VIEW-XXXXXX-CEOWH
3
QR Code
2) Your WiFi name is input already (if this WiFi is not
what you want to connect it to, please tap to switch to
other WiFi. But please note the wifi you are connecting to
should be the 2.4GHz wifi), and input the correct WiFi
Password (Wi-Fi name and Password should not contain
special characters ' and &) and click " Connect to WiFi".
And hold your phone close to the camera and turn up the
phone volume, then click on"Next" and "Start".