Related Manuals for Omnitec OmniFlow
Summary of Contents for Omnitec OmniFlow
- Page 1 BY OMNITEC DESIGN, INC. BY OMNITEC DESIGN, INC. Water Filtration System BY OMNITEC DESIGN, INC. Operation and Maintenance Manual...
- Page 2 WARNING Do not use to pump flammable liquids. Never operate the pump in an explosive environment. Do not assume fluid compatibility. Do not adjust pressure switches without consulting with pump manufacturer. Do not use pump with fluids at temperatures higher than 130 degrees Fahrenheit.
-
Page 3: Operating Instructions
45 psi discharge pressure. This portable unit has a strong aluminum housing with rubber grip handle and easily accessible hose connections. OmniFlow’s two-stage filtration allows for the use of various filter cartridges to meet your requirements. Our standard configuration consists of a 20μ and 5μ filter. - Page 4 3. Check for a large amount of sediment in filter housing. Replace the 20 and 5 micron filters if required. 4. Suction hose has a serious vacuum leak. 5. Inlet or outlet hose has a sharp kink 6. Pumping housing is cracked Ordering Info Part # OmniFlow OWF115 Water Filter, 20 Micron OWF20 Water Filter, 5 Micron OWF5...
- Page 5 Products are installed or used. Omnitec Design Inc the enclosed LIMITED WARRANTY REGISTRATION FORM recommends that, before purchasing and using a and returns it to Omnitec Design Inc within 30 days of Product, purchasers review the Product application, and purchase date.
Need help?
Do you have a question about the OmniFlow and is the answer not in the manual?
Questions and answers