Table 5 Service Port Serial Interface Settings - Vaisala MHT410 User Manual

MHT410 User Guide
2. Start the PuTTY application.
3. Select Connection > Serial & USB and check that the correct COM port is selected in the
Serial or USB line to connect to field. If you are using the PuTTY terminal application
supplied by Vaisala, you can click the USB Finder button to open the Vaisala USB
Instrument Finder program.
4. Check that the other serial settings are correct, and change if necessary.
Table 5 Service Port Serial Interface Settings
Property
Baud rate
Parity
Data bits
Stop bits
Flow control
5. Select Terminal. Use the following settings:
• Local Echo: "Force on". This setting ensures that your typing is shown on the session
window.
• Send line ends with line feeds (CR+LF): Selected. This setting ensures that all text
lines remain visible on the session window.
42
Value
19200
None
8
1
None
M211737EN-F