5.3.6 Select "Wireless Setting"
5.3.7 Press "Scan" button at right hand side of screen, then select the router SSID from list box
5.3.8 Select Wireless security type "WPA2-PSK"
security type].
5.3.9 Select Data Encryption "AES".
5.3.10 Manually typing Router's WiFi password. After that press "Apply" button, bulb camera will
reboot.
5.3.11 Switch PC/Notebook to same network as bulb camera. Under bulbcam software, bulb camera will
be listed there under LAN section.
__________________________________________________________________________________________
Eazzy Digital Video Technology Limited
[Do not choose WEP, also Router do not use WEP as
20 / 36
www.eazzydv.com