RC-9000 MULTIBAND P25 AIRBORNE TRANSCEIVER REMOTE CONTROL Operating Instructions TiL Document No. 13RE481 Rev. C SEPTEMBER 2015 Technisonic Industries Limited 240 Traders Boulevard, Mississauga, Ontario L4Z 1W7 Tel: (905) 890-2113 Fax: (905) 890-5338 www.til.ca Copyright by Technisonic Industries Limited. All rights reserved.
Page 2
TECHNISONIC INDUSTRIES LIMITED This page is intentionally left blank. RC-9000 Operating Instructions TiL 13RE481 Rev. C...
Page 3
2.6: Corrected Yellow & Blue Bands. Corrected Spelling & Grammar throughout document. Changes made to DO-160G: Sep. 15, 2015 A.L. - Operational Shock and Crash Safety changed to Category B. - Flammability Condition added. RC-9000 Operating Instructions TiL 13RE481 Rev. C...
Page 4
TECHNISONIC INDUSTRIES LIMITED This page is intentionally left blank. RC-9000 Operating Instructions TiL 13RE481 Rev. C...
Page 5
Changes or modifications not expressly approved by Technisonic Industries could void the user’s authority to operate the equipment. This manual is designed to provide information about the RC-9000. Every effort has been made to make this manual as complete and accurate as possible.
Page 6
(end users) in support of regulatory agency approval. Please refer to the Technisonic website www.til.ca for the latest issue of available STCs and letter of authorization for use. RC-9000 Operating Instructions...
This publication provides operating and installation information on the RC-9000 remote control. DESCRIPTION The RC-9000 is designed to be a remote control head for the TDFM-9000 series of airborne transceivers. It is a secondary (slave) control point and is not intended to replace the function of the front panel of the radio.
Page 10
TECHNISONIC INDUSTRIES LIMITED This page is intentionally left blank. RC-9000 Operating Instructions TiL 13RE481 Rev. C...
TECHNISONIC INDUSTRIES LIMITED SECTION 2: OPERATING INSTRUCTIONS GENERAL The RC-9000 is designed to be a secondary control point for the TDFM-9000 airborne transceiver. These instructions assume a working knowledge of the TDFM-9000 transceiver. Operation of the RC-9000 is similar to the TDFM-9000.
If you press a key on a band that is already selected, the receive audio will be toggled off and on. This can be useful to temporarily mute distracting traffic. RC-9000 Operating Instructions TiL 13RE481 Rev. C...
2.11 BRT(6) AND DIM(9) KEYS Use these keys to dim or brighten the display. The radio powers up at full brightness for normal use but can be dimmed for night operations. RC-9000 Operating Instructions TiL 13RE481 Rev. C...
DTMF keypad while transmitting, the band you are using must be selected on the display. If the radio is installed using both of the combined input/outputs, then pressing the MODE key will alternate the display between the two users. RC-9000 Operating Instructions TiL 13RE481 Rev. C...
Technisonic. This Warranty shall not be transferable or assignable to any other persons, firms, or corporations. For warranty registration, please complete the online Warranty Registration Form found at www.til.ca. RC-9000 Operating Instructions TiL 13RE481 Rev. C...
Need help?
Do you have a question about the RC-9000 and is the answer not in the manual?
Questions and answers