Page 1: Table Of Contents
Manual for AL500AC and AL100AC This manual will help you installing, uninstalling and how to connect to a wireless network using diﬀerent operating systems (OS). USB cradle usage/ placement ..............2 Download driver ..................2 Installation of driver in Windows 7 / 8 ..........3...
Page 2: Usb Cradle Usage/ Placement
In the giftbox you will find a USB cradle/adapter. To get the best signal/connection you can use the USB cradle. This will allow you to place the AL100ac/AL500ac a place where signal receiption is better. Download driver On our website www.jensenscandinavia.com/downloads...
Page 3: Installation Of Driver In Windows 7 / 8
Select «Yes, I want to restart my computer now» The driver for AL500/AL100AC is now installed. After restart of Windows you can connect the AL100AC/AL500AC to the USB port on your PC. The new device will be installed automatically and are ready for use after about 30 seconds.
Page 4: Installation Of Driver In Windows 10
Select «Yes, I want to restart my computer now» The driver for AL500/AL100AC is now installed. After restart of Windows you can connect the AL100AC/AL500AC to the USB port on your PC. The new device will be installed automatically and are ready for use after about 30 seconds.
Page 5: Installation Of Driver In Mac Os X
Installation of driver in Mac OS X Important! Do not connect the AL100AC/AL500AC before the driver is installed. Insert the driver CD, open Finder and go to the folder Mac -> OS X and open the folder for your OS X version * If you have downloaded the driver please run the file installer.pkg to start the installation.
Page 6: Installation Of Driver In Linux
Installation of driver in Linux 1. Download the latest Linux driver from www.jensenscandinavia.com/downloads 2. Copy the driver to your local folder. 3. Open console 4. Unzip the driver 5. Enter make (and click enter) 6. Enter sudo apt-get install build-essential (and click enter) 7.
Page 7: Connect To A Wireless Network Using Windows 7
Connect to a wireless network using Windows 7 This guide show you how to connect to your Air:Link router based on the built-in wireless tool for Windows 7. In some cases your computer is delivered with a third party software from the computer manufacturer. If so, please contact the computer manufacturer support for more detailed information.
Page 8: Connect To A Wireless Network Using Windows 8
Connect to a wireless network using Windows 8 This guide show you how to connect to your Air:Link router based on the built-in wireless tool for Windows 8. In some cases your computer is delivered with a third party software from the computer manufacturer. If so, please contact the computer manufacturer support for more detailed information.
Page 9: Connect To A Wireless Network Using Windows 10
Connect to a wireless network using Windows 10 This guide show you how to connect to your Air:Link router based on the built-in wireless tool for Windows 8. In some cases your computer is delivered with a third party software from the computer manufacturer. If so, please contact the computer manufacturer support for more detailed information.
Page 10: Connect To A Wireless Network Using Mac Os X
Connect to a wireless network using Mac OS X 1) Click the icon for the Wireless-AC Utility. 2) Select your wireless network and click Connect. 3) Enter the password of the wireless 4) Click Link Status to see the status network, then re-type the password of the connection.
Page 11: Uninstallation Of Driver In Windows
Uninstallation of driver in Windows If you need to upgrade the driver for AL100AC/AL500AC we recommend that you first uninstall (*) the current driver. *) In the below instructions we are showing AL500ac as an example. The procedure for AL100ac is the same.
Page 12: Uninstallation Of Driver In Mac Os X
Uninstalling of the driver in Mac OS X If you want to re-install the driver we recommend that you first uninstall the driver. 1) Insert the CD (or go into the folder of the downloaded driver) and open the folder for your OS X version.
Page 13: How Do I Find Which Driverversion Is Installed
WEB page www.jensenscandinavia.com/downloads Click Control panel -> System -> Device manager. Open the Network card tab and then select AirLink 100AC / AL500AC Click the Driver tab. Here you will see which driver version that are currently installed. Page 13...

This manual is also suitable for:

Al100ac