14
Operation
TAPE Operation
Listening to cassette tapes
Cassette tapes can be played back in this unit.
1. Open the tape door by pressing
Z PUSH EJECT.
2. Insert the tape.
3. Close the tape door.
4. Select the TAPE funtion by pressing TAPE
on the unit or FUNCTION on the remote
control.
To
Press x on the remote
4
Stop
control or STOP on the unit.
Press B/X on the remote
Playback
control or < PRESET - /
PRESET+ > on the unit.
Press B/X repeatedly on
Change
the remote control or
direction
< PRESET - / PRESET + >
on the unit.
After pressing . m /
Searching for a
M > during playback,
section within
press B/X at a point you
a track
want.
You can set the tape to play
one side
one time
Play mode
sides repeatedly
pressing REPEAT one or
more times.
MCT435-AOU-SMEXCLK-ENG.indd 14
MCT435-AOU-SMEXCLK-ENG.indd 14
Other Operations
Programmed Playback
The program function enables you to store
your favourite fi les from any disc or USB device.
A program can contain 20 tracks.
1. Insert a CD or USB and wait for it to be
2. Press PROGRAM/MEMO on the remote
3. Press . m or M > on the remote
Do this
4. Press PROGRAM/MEMO again to save and
5. Press B/X to play the programmed music
6. To clear your selection, press x twice.
The programs are also cleared when the disc or
USB device is removed, the unit is switched to
power off or the function is switched to others.
, both sides
, or both
, by
order.
control in stop status.
control or |<< / >>| on the unit to select a
track.
select a next track.
fi les.
NOTE
2010.3.11 4:26:31 PM
2010.3.11 4:26:31 PM