Preparations; Charging Crp229; On Using Your Battery; Power On/Off Crp229 - LAUNCH TECH CRP229 User Manual

LAUNCH

3 Preparations

3.1 Charging CRP229

1. Connect the USB end of the included power adaptor to the USB port of your tool;
2. Connect the other end of the adaptor into an AC outlet. If the tool is being charged, the charging indicator displays .
Once the indicator turns

3.2 On Using Your Battery

If the battery remains unused for a long period of time or the battery is completely discharged, it is normal that the
tool will not power on while being charged. Please charge it for a period of 5 minutes and then turn it on.
Please use the included charger to charge your CRP229. No responsibility can be assumed for any damage or loss
caused as a result of using power adaptors other than the one specified.
To conserve the service life of the battery, avoid charging too frequently.
The charging time of battery varies with temperature condition and battery consumption status.

3.3 Power On/Off CRP229

3.3.1 Power on

Press the POWER key to turn on CRP229.
Note: If it is the first time you have used this tool or the tool remains idle for a long period of time, CRP229 could fail to turn
on. Please charge your CRP229 for a minimum of 5 minutes and attempt to turn on again.
, it means that charging is complete.
7
CRP229 English User's Manual