Rowenta CF9320E0 Instructions For Use Manual page 10

- -
N
FITTING THE BRUSHES AND REMOVING THEM FROM THE APPLIANCE (K) :
CLIC!
AIR TEMPERATURE / SPEED (B):
IONIC SYSTEM:
your appliance automatically emits negative ions to eliminate static electricity. You hair will shine
and be easier to untangle.
HOW TO USE YOUR BRUSH? :
This is the basic technique of blow drying.
DRYING AND STYLING IN ONE GO!
- After washing your hair, dry it well in a towel and carefully untangle it.
Do not use your brush on tangled or backcombed hair or on hair extensions.
- You can pre-dry your hair with the drying function (B) (without the brush) while still keeping
your hair damp.
- Divide your hair into individual sections a few centimetres wide (see booklet "professional tips")
and work on one section at a time. You can use clips to hold up the other sections of hair.
- Fit the brush (large or small diameter, depending on the length of your hair and the desired
effect) to the body of the appliance, pushing it until it clicks home.
! !
REMINDER: The brush accessory (H/I) is very hot when
in use. Be careful when removing it.
Removing the brush:
- Remove the brush from its recess.
- 1: moderate temperature and blowing speed
- 2: high temperature and blowing speed
- *: cold air
- 0: appliance switched off
DIRECTION OF ROTATION (C):
This function enables you to automatically wind the sec-
tion of hair around the brush to blow dry your hair effortle-
ssly.
- To start rotation, press the selector switch (C) in the desired
direction of rotation (right or left).
- Keep pressing the switch while blow drying.
- To stop rotation, release the switch.
$.42
!
#
EN