Advertisement
CLOCK
AL1
AL2
CLOCK
SET RADIO
SET TIME
SLEEP
3 sec.
SOURCE
SLEEP
Switch to standby mode
OFF
SOURCE
Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
User Manual
To download the full user manual, visit
www.philips.com/support
VOLUME
Specifications
Rated Output Power
1 W RMS
Signal to Noise Ratio
>50 dB
Tuning range
87.5-108 MHz
Power supply
Model: ASSA36E-050250;
- AC Power
Input: 100-240 V~, 50/60 Hz, 0.6 A
Output: 5.0 V
2500 mA
- Battery
2 x AA batteries
Operation Power Consumption
<15 W
Standby Power Consumption
<1 W
Dimensions: Main Unit (W x H x D)
195 x 99 x 123 mm
Weight: Main Unit
0.65 kg
Read and understand all instructions before you use this product. If damage is caused
by failure to follow the instructions, the warranty does not apply.
Safety
Warning
Never remove the casing of this clock radio.
•
Never lubricate any part of this clock radio.
•
•
Never place this clock radio on other electrical equipment.
Keep this clock radio away from direct sunlight, naked flames or heat.
•
Make sure that you always have easy access to the power cord, plug or adaptor to
•
disconnect the clock radio from the power.
•
Make sure that there is enough free space around the product for ventilation.
The clock radio shall not be exposed to dripping or splashing.
•
•
Do not place any sources of danger on the clock radio (e.g. liquid filled objects,
lighted candles).
Where the plug of the Direct Plug-in Adapter is used as the disconnect device,
•
the disconnect device shall remain readily operable.
•
Only use power supplies listed in the user manual.
•
Battery usage CAUTION – To prevent battery leakage which may result in bodily
injury, property damage, or damage to the clock radio:
•
Install the battery correctly, + and - as marked on the clock radio.
•
Remove the battery when the clock radio is not used for a long time.
The battery shall not be exposed to excessive heat such as sunshine, fire or
•
the like.
Notice
This product complies with the radio interference requirements of the European
Community.
Any changes or modifications made to this device that are not expressly approved by
Philips Consumer Lifestyle may void the user's authority to operate the equipment.
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means that the
product is covered by the European Directive 2002/96/EC.
Please inform yourself about the local separate collection system for electrical and
electronic products.
Please act according to your local rules and do not dispose of your old products with
your normal household waste. Correct disposal of your old product helps to prevent
potential negative consequences for the environment and human health.
Your product contains batteries covered by the European Directive 2006/66/EC, which
cannot be disposed with normal household waste.Please inform yourself about the
local rules on separate collection of batteries because correct disposal helps to prevent
negative consequences for the environmental and human health.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging
easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and
polyethylene (bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused if disassembled by
a specialized company. Please observe the local regulations regarding the disposal of
packaging materials, exhausted batteries and old equipment.
The making of unauthorized copies of copy-protected material, including computer
programs, files, broadcasts and sound recordings, may be an infringement of copyrights
and constitute a criminal offence. This equipment should not be used for such purposes.
Note
•
The type plate is located on the bottom of the apparatus.
Advertisement
