Inter-m PV-6232A Operation Manual page 14

MultI VoICe FIle
※ Caution: Be cautious that if file name and folder configuration are wrong, it does not play normally.
3) If pushing StoP button, the play stops and it moves into the default screen.
Folder name - AutoPlAY, file name - eMoRG
5.3 Communication Speed (Baud Rate) Setting
When connecting this device with PW-6242B, you can set up communication speed for each product. In
case of unmatched communication speed, you cannot control with RS-232 communication terminal and
therefore, set up the proper communication speed. If pushing PARAMeteR after moving into BAuDRAte in
setting mode screen, BAuDRAte setting screen is displayed and you can set up the communication speed by
rotating PARAMeteR.
BaudRate
9600 bps
1) You can change the communication speed into 9600BPS/19200BPS by rotating PARAMeteR. Refer to
the following to set up the communication speed for the model to be connected.
2) If pushing PARAMeteR after changing the communication speed, changed communication speed is set up.
3) If pushing StoP button during setting up the communication speed, the setting is not saved and it moves
into the default screen.
5.4 DELETION
You can select the sound sources file saved to uSB memory or SD Card to delete. If pushing PARAMeteR
after moving into FIle Delete in setting mode screen, the screen which enables the selection of file to be
deleted is displayed and you can select the file to be deleted using PARAMeteR.
Root
INTER-M
USER
TOP
1) Select the file to be deleted by rotating PARAMeteR.
2) If selecting the file to be deleted, delete confirmation window is displayed. You can select YeS or No by
rotating PARAMeteR. If pushing PARAMeteR after selecting YeS, the selected file is deleted. If pushing
PARAMeteR after selecting No, the selected file will not be deleted.
12 PV-6232A
SET
MoDel
PW-6242B
eR-6116
현재 폴더 위치 Current folder location
Sub-folder
하위 폴더
Sub-folder
하위 폴더
SET
BaudRate
19200 bps
BaudRate
19200 bps
9600 bps