Inter-m PV-6232A Operation Manual page 12

MultI VoICe FIle
4) If you push PAuSe (
recording pauses, and PAuSe ( ) and ReC(●) buttons flash.
5) If pushing PlAY(▶) button once again, it continues to record. using this function, the user can record only
desired parts to create one sound source file.
6) If you push StoP( ) button, the recording is stopped.
※ When recording after inputting all audio signals to MIC IN terminal in front side and audio input terminal
7) If you push PlAY(▶) button after completing the recording, it plays from the last recorded content.
in backside (RCA, AuX), the audio signal is recorded by mixing.
5. Setting Mode
You can set up repeat & play, auto play, communication speed, file deletion, and output mode and check
the firmware version.
SETTING MODE
1. REPEAT SET
2. AUTO PLAY SET
3. BUADRATE SET
1) During default screen or playing the sound source, if you push PARAMeteR longly, it is converted into
selection mode.
2) In setting mode, you can set up repeat/auto play, communication speed, and output mode and delete the file.
3) Rotate PARAMeteR in setting mode, you can move the setting item.
4) If you push PARAMeteR after moving into the desired item, the item is selected.
5) If there is no input for 5 seconds, it moves into the default screen.
6) If the sound source is played at the device, it cannot be moved to FIle Delete/outPut MoDe/VeRSIoN
menu.
5.1 Repeat
You can play by repeating the playing file. If pushing PARAMeteR after moving into RePeAt Set in setting
mode screen, the screen to set up repeat mode displays, and if pushing PARAMeteR after changing it into
the desired function by rotating PARAMeteR, it is set to due function.
REPEAT
REPEAT 1
10 PV-6232A
) button during recording, display window displays ReCoRD PAuSe statement, the
||
SETTING MODE
4. FILE DELETE
5. OUTPUT MODE
6. VERSION
SET SET
REPEAT
REPEAT FOLDER