Advertisement
1
4
Unpacking
Choosing the right voltage
Selected models are equipped with a voltage selection switch. You can find it
Computer
Keyboard*
Mouse* Power cord
Xbox
Publications
at the rear of your computer. Models without a voltage selection switch control
controller*
voltage automatically.
If the electricity supply range is 100-127 V AC, set the switch to 115 V.
If the electricity supply range is 200-240 V AC, set the switch to 230 V.
* Selected models only.
NOTE: Some models may contain items not listed here.
2
5
Connecting the keyboard and mouse
Connecting the monitor
3
6
Connecting the Ethernet cable
Connecting the power cable
7
Top/Bottom view of the computer
Turning on the computer
Connecting to the Internet
You need a contract with an Internet Service Provider (ISP) and some hardware
in order to connect to the Internet. ISPs and the services they offer vary by
country. Contact your ISP for services available in your country. Your computer
supports wireless (selected models only) or wired networks that connect your
computer to other devices.
Wired network connection
For wired networks, connect one end of an Ethernet cable (purchased
separately) to the Ethernet connector on your computer, and then connect the
other end to the network router or broadband modem. Consult your ISP for
USB 3.0 connector/USB power
detailed setup instructions.
off charging connector
NOTE: Broadband modem and router installation procedures vary
Headphone connector
depending on the manufacturer. Follow the manufacturer's instructions.
Microphone connector
Wireless network connection
For wireless networks, you can use the built-in Wi-Fi antenna to access your
wireless home network.
1
Selected models only.
To connect your computer to the wireless network:
Click or tap the network icon on the taskbar, then select the name of your
router. Click or tap Connect, then follow the steps on the screen.
Test the wireless network by opening your Web browser and accessing any
Web site.
ATTENTION: Do not insert 3-inch discs into the optical drive.
Rear view of the computer
USB 3.0 connector
PCI Express X 16 adapter
1
Power button
Wi-Fi antenna
1
Xbox pairing button
Audio connectors
Ethernet connector
USB 3.0 connectors (4)
VGA connector
1
Selected models only.
NOTE: If your model has two VGA monitor connectors, be sure to use the
connector on the graphics adapter.
Using Xbox
NOTE: Xbox is available only for some countries or regions.
1. Connecting Xbox controller to your computer via Micro USB cable.
2. Connecting Xbox controller to your computer via built-in dongle.
Press and hold the pairing buttons from both the controller and
computer for 3 seconds.
DVI connector
HDMI connector
Power connector
PS II connector
USB 2.0 connectors (2)
NOTE:
1. Press and hold the Nexus button for 1 second to activate the Xbox
controller.
2. The Nexus button will stay lit when connected.
Advertisement
