LG SoundPlate LAB540W Simple Manual page 2

Network Playback
SmartShare PC software Installation
a Install SmartShare PC software.
Run the program, and set the share folder you want.
b
,
Turn on the media server for using S/W
SmartShare Network Playback
Check the network connection and settings.
a
Router
b c
Additional Information
Customer Support Open source software notice
You can update the Player using the latest software to To obtain the corresponding source code under GPL,
enhance the products operation and/or add new features. LGPL and other open source licenses, please visit
To obtain the latest software for this player (if updates have opensource.lge.com. All referred license terms, warranty
been made), proceed the software updates as wirtten or disclaimers and copyright notices are available to
visit http://www.lg.com or contact LG Electronics customer download with the source code.
care center.
Speci cation
Technische Daten / Spéci cations / Especi caciones / Speci che
ENGLISH
Power requirements 120 V ~ 60 Hz
Power consumption 38 W
Approx.
Dimensions 700 mm x 39.5 mm x 320 mm
(W x H x D) (27.5 inches x 1.5 inches x 12.6
inches)
Net Weight (Approx.) 4.6 kg (10.1 lbs)
Bus Power Supply
5 V 0 500 mA
(USB)
Design and speci cations are subject to change without
notice.
NOTICE: For Product Identi cation and Compliance/Safety
labeling information please refer to Main label on the
bottom of unit.
LAB540W-NE_BUSALLK_SIM_1763.indd 2
Using Bluetooth
Select the Bluetooth function.
a
LG-HTS
Set on the bluetooth and Select "LG-HTS" on your
b
bluetooth device.
LG-HTS
Play music on your bluetooth device.
c
Safety Information
http://
Enjoying Private Sound
Make sure that mobile device is connected to the same
a
Wi-Fi network as this player.
Router
Turn on the mobile device LG AV Remote
b c
App is lnstalled and run LG AV Remote App.
,
Not all modes support sound privacy and pairing multiple devices is not available.
This device is equipped with a portable battery or accumulator.
CAUTION
Safety way to remove the battery or the battery from the
RISK OF ELECTRIC SHOCK equipment: Remove the old battery or battery pack, follow the
DO NOT OPEN
steps in reverse order than the assembly. To prevent contamination
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT of the environment and bring on possible threat to human
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE and animal health, the old battery or the battery put it in the
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. appropriate container at designated collection points. Do not
dispose of batteries or battery together with other waste. It is
This lightning ash with arrowhead symbol
recommended that you use local, free reimbursement systems
within an equilateral triangle is intended to
batteries and accumulators. The battery shall not be exposed to
alert the user to the presence of uninsulated
excessive heat such as sunshine, re or the like.
dangerous voltage within the product's
enclosure that may be of su cient magnitude to
IMPORTANT SAFETY
constitute a risk of electric shock to persons.
INSTRUCTIONS
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
1. Read these instructions.
maintenance (servicing) instructions in the
2. Keep these instructions.
literature accompanying the product.
3. Heed all warnings.
WARNING: This product contains chemicals known to the State of
4. Follow all instructions.
California to cause cancer and birth defects or other reproductive
harm. Wash hands after handling. 5. Do not use this apparatus near water.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO 6. Clean only with dry cloth.
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
7. Do not block any ventilation openings. Install in accordance
WARNING: Do not install this equipment in a con ned space such with the manufacturer's instructions.
as a book case or similar unit.
8. Do not install near any heat sources such as radiators, heat
CAUTION: Do not block any ventilation openings. Install in
registers, stoves, or other apparatus (including ampli ers) that
accordance with the manufacturer's instructions.
produce heat.
Slots and openings in the cabinet are provided for ventilation and
9. Do not defeat the safety purpose of the polarized or grounding-
to ensure reliable operation of the product and to protect it from
type plug. A polarized plug has two blades with one wider than
over heating. The openings shall be never be blocked by placing
the other. A grounding type plug has two blades and a third
the product on a bed, sofa, rug or other similar surface. This product
grounding prong. The wide blade or the third prong are pro-
shall not be placed in a built-in installation such as a bookcase or
vided for your safety. If the provided plug does not t into your
rack unless proper ventilation is provided or the manufacturer's
outlet, consult an electrician for replacement of the obsolete
instruction has been adhered to.
outlet.
10. Protect the power cord from being walked on or pinched par-
ticularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories speci ed by the manufac-
CAUTION: This product employs a Laser System.To ensure proper
turer.
use of this product, please read this owner's manual carefully and
retain it for future reference. Shall the unit require maintenance, 12. Use only with the cart, stand, tripod, bracket,
contact an authorized service center.
or table speci ed by the manufacturer,
or sold with the apparatus. When a cart is
Use of controls, adjustments or the performance of procedures
used, use caution when moving the cart/
other than those speci ed herein may result in hazardous radiation
apparatus combination to avoid injury from
exposure.
tip-over.
CAUTION concerning the Power Cord
To disconnect power from the mains, pull out the mains cord
13. Unplug this apparatus during lightning storms or when unused
plug. When installing the product, ensure that the plug is easily
for long periods of time.
accessible.
14. Refer all servicing to quali ed service personnel. Servicing is
CAUTION: The apparatus shall not be exposed to water (dripping
required when the apparatus has been damaged in any way,
or splashing) and no objects lled with liquids, such as vases, shall
such as power-supply cord or plug is damaged, liquid has been
be placed on the apparatus.
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate nor-
mally, or has been dropped.
Software Update
Check the network connection and settings.
a
Router
Select [Update] in the [Settings] -> [OTHERS] ->
b
[Software] then follow the directions on the screen.
FCC Compliance Statement FCC RF Radiation Exposure Statement : This equipment complies
with FCC radiation exposure limits set forth for an uncontrolled
This device complies with part 15 of the FCC rules.
environment. This equipment should be installed and operated
Operation is subject to the following two conditions:
with minimum distance 20 cm between the radiator and your
(1) This device may not cause harmful interference, and body. End users must follow the speci c operating instructions for
satisfying RF exposure compliance. This transmitter must not be
(2) This device must accept any interference received, including
co-located or operating in conjunction with any other antenna or
interference that may cause undesired operation.
transmitter.
NOTE: This equipment has been tested and found to comply with
CAUTION: Regulations of the FCC and FAA prohibit airborne
the limits for a Class B digital device, pursuant to Part 15 of the FCC
operation of radio-frequency wireless devices because their signals
Rules. These limits are designed to provide reasonable protection
could interfere with critical aircraft instruments.
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy Responsible Party :
LG Electronics USA, Inc. 1000 Sylvan Avenue
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, Englewood Cli s, NJ 07632
there is no guarantee that interference will not occur in a particular TEL. : +1-800-243-0000
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and
receiver.
 Connect the equipment into an outlet on a circuit
di erent from that to
 which the receiver is connected.
 Consult the dealer or an experienced radio/TV
technician for help.
CAUTION: Any changes or modi cations not expressly approved
by the party responsible for compliance could void the user's
authority to operate this equipment
FCC WARNING : This equipment may generate or use radio
frequency energy. changes or modi cations to this equipment may
cause harmful interference unless the modi cations are expressly
approved in the instruction manual. The user could lose the
authority to operate this equipment if an unauthorized change or
modi cation is made.
LG Customer Information Center
1-800-243-0000 USA, Consumer
1-888-865-3026 USA, Commercial
Register your product Online!
www.lg.com
2014-03-26 3:17:28