Internet technology for motorhomes and caravans (12 pages)
Summary of Contents for Falcon 1990
Page 1
1992 1993 with pull with cylinder with pull and cylinder Index • Before Installation........• Installation ..........• Series 1990 Parts List ......Head Jamb and Threshold Preparation .. • Aluminum Door Preparation ....• Hollow Metal Door Preparation ....
Before Installation 1. Check “Series 1990 Parts List” (see page 5). 2. Prepare door, threshold, and head jamb: aluminum door page 7; hollow metal door page 8; threshold and head jamb page 6. NOTES 1. Handing of device can be changed.
Page 3
Install cylinder Install cylinder. If required, cut cylinder tailpiece as shown. Heads of cylinder mounting bolts must be flush with door surface. 3/64" 15/64" dia. drill 5/16" dia. c'sink Tailpiece 3/16" from end of cylinder tailpiece to surface of door Install pinion cam and traveler.
Page 4
Install retractor. Install retractor over pinion cam (Figure 4-1). Position retractor as shown in Figure 4-2 for holdback (HB) or night latch (NL) function. Hold-back (HB) Night latch (NL) Hold-back (HB): Turning key one complete rotation retracts latch bolt. If key is removed in this position, latch bolt stays retracted.
SERIES 1990 PARTS LIST Top Rod Assembly 29 28 Bottom Assembly Bottom Assembly LHR shown Item Qty. Description Item Qty. Description Housing Latch bracket (hollow metal doors only) Lever arm, LH #10-32 x 1/4" UFPHMS Lever arm, RH #10-32 x 3/8" FPHMS...
PARTS LIST (CONTINUED) TOP ROD ROD LATCH (RL) BOTTOM HEX BOTTOM ASSEMBLY ROD ASSEMBLY ROD ASSEMBLY Bottom rod: SU latch Bent rod 35.125" long 4270101806 4270100017 (can be shortened by 5") Bottom rod: Jam nut 3/8"-24 Bent rod 37.812" long NUT.101 (Pkg of 10) 4270101825 (can be shortened by 6")
ALUMINUM DOOR PREPARATION Lock Stile Hinge Stile 1/8" 1-1/4" 7/16" 7/8" Cutout on inside face only 1-3/8" See note 1/4" R Face of door stop 1-3/8" NOTES note #9 (0.196" dia.) D: Dimension from door stop face to thru inside face housing is 3/4"...
HOLLOW METAL DOOR PREPARATION Lock Stile Hinge Stile 1/8" 1-1/4" 7/8" 7/16" Cutout on inside face only 7/8" 7/8" #10-32 thru See note 1/4" 3/16" 4 places 3/4" Face of 1/4" R door stop See note 1/2" #9 (0.196" dia.) thru inside face 1/4-20 tap, 2 places 5/8"...