Operating the appliance
en
Controls
Control panel
Operating buttons
Button
Explanation
Switches the extractor hood on and off
#
Switches on the run-on function
x
Reduces the power level/resets the
A
metal grease filter and activated
charcoal filter saturation indicators
Increases the power level
@
Indicators/symbols
Indicator/
Explanation
symbol
Run-on function
(
)*
û
x
Metal grease filter saturation indicator
(
)**
û
!
Activated charcoal filter saturation
(
)**
û
"
indicator
Power level 1
‚
Power level 2
ƒ
Power level 3
„
Intensive mode
›
*LED lights up next to the symbol in brackets
**LED lights up underneath the symbol in brackets
8
Before using the appliance for the first time
Before you can use your new appliance, you must apply
certain settings.
Follow the instructions below before using the
appliance for the first time:
Notes
Thoroughly clean the appliance and accessories.
■
If your hob is a gas hob, fit the gas deflector to the
■
appliance. To do this, refer to the printed
supplement.
Initial use
Switching over the display for circulating-air mode
For circulating-air mode, the electronic controller
indicator must be switched over accordingly:
Check whether the extractor hood is connected and
1.
switched off.
Press and hold the
@
2.
the display panel.
This will switch the electronic controller over to
circulating-air mode.
Switching over the display for exhaust air mode
Check whether the extractor hood is connected and
1.
switched off.
Press and hold the
@
2.
the display panel.
This will switch the electronic controller over to air
extraction mode.
Switching the appliance on and off
Before you switch on the appliance, open both
Note:
fan flaps by pressing on them lightly.
Always adjust the setting according to the current
Note:
conditions. To eliminate strong cooking smells, select a
high fan setting.
button until
flashes twice on
'
button until
flashes once on
'