Semi-Automatic & Manual Operation; Manual Operation—Using Slide Switches; Manual Off—One Station Or Multiple Stations; Manual Timed Watering For One Station - Orbit 57004 Installation & User Manual

WTM210728 57004-24 rD.qx
4
s e c t i o n
The Orbit controller has the ability to override the automatic program with-
®
out disturbing the preset program.
1. Manual Operation—Using Slide Switches
You can override the automatic program and operate the controller manually
by using the watering duration slide switches [See Figure 11]. If a manual
operation is started during an automatic program cycle, the automatic pro-
gram cycle will be cancelled.
MANUAL ON
WATERING
DURATION
MINUTES
MANUAL OFF
FIGURE 11: Manual Watering
A. Manual On—One Station
Turn the rotary selector to the
Turn on any individual station by moving that station' s watering duration
slide switch to the
MANUAL ON
and forth between the water drop and the time of day.
The rotary selector must stay in
Only one station can be active at a time. The last station set to the
position will be active (watering).
When a station is turned on manually, the display will show
drop. The display also shows the number of the station that is activated [See
Figure 12].
ON
FIGURE 12: Manual Operation Display
6/11/01 10:57 AM
Semi-Automatic &
Manual Operation
1 2
2
5
10
15
20
25
30
45
60
120
position.
AUTO
position (fully up). The display blinks back
for this operation to take effect.
AUTO
MANUAL ON
inside a water
ON
STATION
01
MANUAL
Page 8
B. Manual Off—One Station or Multiple Stations
Turn off any individual station or stations by moving the watering dura-
tion slide switch to the
FIGURE 13: Duration Slide Switch Set to Manual Off
Leave the rotary selector in the
vidual stations.
Turning the rotary selector to the
programming off. This turns all watering off and is essentially used as a sys-
tem shut down.
To resume automatic watering—
Turn the rotary selector to the
slide switch or switches are set for the specific watering durations.
C. Manual Timed Watering for One Station
You can set any single station to go on manually for a specific amount of time
from 2 to 120 minutes. This is a two-step process using the watering dura-
tion slide switch.
First move the watering duration slide switch to the
position, then back to any duration position. For example, if you want
to water a specific station for 15 minutes, push the slide switch to the
position then back to the 15 minute position [See Figure 14.]
MANUAL ON
MANUAL ON
2
5
10
15
DURATA
20
D'IRRIGAZIONE
25
MINUTI
30
45
60
120
MANUAL OFF
FIGURE 14: Manual Watering Station 1 Using the Slide Switch
6
position (fully down). [See Figure 13.]
MANUAL OFF
1
MANUAL
ON (ACCESO)
2
5
10
DURATA
15
D'IRRIGAZIONE
20
MINUTI
25
30
45
60
120
MANUAL OFF (SPENTO)
position for the
AUTO MANUAL OFF
position will turn all stations and all
OFF
position and make sure the duration
AUTO
MANUAL ON
1 2
MANUAL ON
2
5
10
15
DURATA
20
D'IRRIGAZIONE
25
MINUTI
30
45
60
120
MANUAL OFF
to affect indi-
(fully up)
1