License Requirements - Honeywell Bendix/King KY 196B Installation Manual

Vhf communications transceiver
Table of Contents

Advertisement

1.5 ACCESSORIES REQUIRED, BUT NOT SUPPLIED
A.
Communications antenna and cables.
For Installations which must meet the German Cetecom antenna conducted
radiation requirement, one of the following antenna must be used:
Manufacturer
Chelton
Dayton Granger
Trivec--Avant Corp.
Trivec--Avant Corp.
B.
Headphones: 500Ω nominal impedance.
C.
Microphone: Low impedance carbon or dynamic with transistorized preamp.
D.
For 13.75V operation of the KY 196B a 14 to 28V converter such as the KGS
Electronics Model RB--125 or equivalent may be used. The RB--125 is available
from BENDIX/KING under PN 068--01016--0003.

1.6 LICENSE REQUIREMENTS

The transmitter, as installed in the aircraft, requires an Aircraft Radio Station License. This
license is obtaining by filing FCC Form 404, Aircraft Radio Station License Application, which
may be obtained from your local FCC Field Office. The KY 196B may be operated for up to 30
days without a station license after filing Form 404 while awaiting the receipt of the radio license
if a copy of FCC Form 404 is kept in the aircraft.
This equipment has been type accepted by the FCC and entered on their list of type accepted
equipment as Honeywell International Inc. KY 196B, and must be identified as Honeywell
International Inc. KY 196B on FCC Form 404.
THE VHF TRANSMITTER IN THIS EQUIPMENT IS
GUARANTEED TO MEET FEDERAL COMMUNICATIONS
COMMISSION ACCEPTANCE OVER THE OPERATING
TEMPERATURE RANGE ONLY WHEN AN HONEYWELL
INTERNATIONAL INC. CRYSTAL IS USED IN THE
STABILIZED MASTER OSCILLATOR.
USE OF OTHER THAN AN HONEYWELL INTERNATIONAL
INC. CRYSTAL IS CONSIDERED AN UNAUTHORIZED
MODIFICATION AND MAY VOID THE WARRANTY.
10570I01.ZIPCDL
Rev 1 January/2000
BENDIX/KING
KY 196B
VHF COMMUNICATIONS TRANSCEIVER
Part Number
21--38--1RF/36
VF10--108--2
17--40--02W
18--50--01
CAUTION
Page 1-5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents