Advertisement
Quick Links
R-890N(S)/(W)
QUICK START GUIDE
WARNING:
Before starting, read carefully all the warnings given
in the full operation manual for the safe use of your
oven.
1
2
3
4
5
6
7
8
1
DIGITAL DISPLAY
9
EASY DEFROST pad
2
MULTI COOK pad
10 HELP pad
3
CONVENIENCE/PIZZA pad
11 CONVEC pad
4
MORE, LESS pads
12 PREHEAT pad
5
GRILL pad
13 POWER LEVEL pad
6
MIX pad
14 CLOCK pad
7
NUMBER AND
15 INSTANT COOK/START pad
TEMPERATURE pads
16 INSTANT ACTION pads
8
STOP/CLEAR pad
TINS-A761WRRZ-J81
1
INSTALLATION
INSTALLATION
1. Remove all packaging and
accessories from the oven, including the
feature sticker fixed to the outside of the door
and the wrapping shown in the diagram.
DO NOT REMOVE THE WAVEGUIDE COVER,
this can be found on the right hand side wall
inside your microwave. Please see page 4 in
the operation manual.
2. Ensure there is free space at least 40cm on the
top and 5cm on both sides and at the rear of
the oven.
3. Ensure the turntable parts
are assembled as shown in
9
the diagram opposite.
Other Accessories
10
The racks are for Grill, Mix,
12
Convection and recommended automatic
11
operations.
13
MICROWAVING
MICROWAVING
To cook for 2 minutes 30 seconds at 70%
power level.
15
14
1. Enter the cooking time by
pressing the numbers in
sequence.
16
2. Select the power by pressing
the POWER LEVEL pad
twice.
3. Press the INSTANT
COOK/START pad once to
start cooking.
4. The display will count down through cooking time.
4
NOTE FOR REHEATING READY MEALS:
Place the ready meal in a heat-resistant flan dish on
the low rack.
40cm
５cm
５cm
If you
require any
advice or assistance
regarding your Sharp product,
please visit our Website or call
Sharp Customer Care.
Website:
Australia: www.sharp.net.au
New Zealand: www.sharp.net.nz
Sharp Customer Care:
1 300 135 022 (Australia)
09 573 0111 (New
Zealand)
POWER LEVEL
x2
INSTANT COOK
x1
START
GETTING STARTED
GETTING STARTED
Plug in the oven and switch on the
power. Nothing will be shown in
the display at this time.
Open the door, the display will flash the
message shown opposite (1).
Close the door. The display will show (2).
The oven is now ready for use.
If you want to set the clock, press the CLOCK pad
once and follow the instructions in Step 3 below.
IMPORTANT
The oven has an Energy Save mode, for details refer to page 8 of your
Operation Manual.
• The oven will default to Energy Save Mode after 3 minutes if not
used. Whilst in Energy Save Mode the display is blank and the
oven cannot be used.
• To remove Energy Save Mode, open and then close
the door, ".0" will be displayed and the oven
is ready for use.
• To remove Energy Save Mode
permanently, set the clock.
SETTING
SETTING
THE
THE
Your oven is fitted with a 12 hour clock.
To set the time of day, ensure the door is closed and
follow the guidelines given below:
1. Press the CLOCK pad once.
2. Enter the time of day by pressing the numbers
in sequence. (EX: 11:34 am or pm)
3. Press the CLOCK pad again to start the clock.
2
1.
2.
CLOCK
CLOCK
x1
CLOCK
CLOCK
x1
3
Advertisement
