Koukaam NETIO-230C Quick Installation Manual

Quick installation guide
Thank you for purchasing the KOUKAAM product. Before usage, please, carefully read this Quick Installation Guide
and Operating Instructions you can find on the CD which is included in the pack. You thus avoid incorrect installation
or incorrect usage of the equipment.
Carefully read the following warning.

Important notice

1. The equipment that you have purchased operates under a certain voltage. Incorrect manipulation with the equipment
may result in damage to the equipment or injury to the person handling it.
2. The manufacturer is not liable for potential damage caused by incorrect usage or location of the equipment
in an unsuitable environment.
3. The equipment is not for outdoor usage.
4. Do not use the equipment in an environment with strong vibrations.
5. Unauthorised modification of this equipment can damage it or cause fire.
6. Prevent contact with fluids; do not expose the equipment to high temperatures.
7. Protect the equipment from falling.
8. Only equipment approved for use in electricity network may be connected.
9. If the equipment malfunctions, disconnect it from the electric power supply and contact your vendor.

Package contents

1. NETIO-230C/CS
2. Network patchcord
3. Power cable
4. Extension cable
5. Installation CD
6. Quick Installation Guide

Front view

1. LED diodes
2. Buttons
3. Serial port
4. RJ45-Socket / Ethernet
5. Serial tunnel
(NETIO 230CS model only)

Back view

1. Main power switch
2. Power inlet
3. Fuse holder
4. Output sockets
1
2
1 2 3
5 3
4
4