Fantech FKD 8XL Installation And Maintenance Instructions

Call 1-800-667-8721 anywhere in the US and Canada
1. The compactness and adaptability of the FKD Series fans permit
1. The compactness and adaptability of the FKD Series fans permit
easy installation.The fans are shipped fully assembled and can be
easy installation.The fans are shipped fully assembled and can be
mounted at any angle. For various mounting, see figures on the
mounted at any angle. For various mounting, see figures on the
following page.
following page.
2. Because this unit has rotating parts, safety precautions should
2. Because this unit has rotating parts, safety precautions should
be exercised during all phases of installation, operation and
be exercised during all phases of installation, operation and
maintenance.
maintenance.
3. CAUTION: "For General Ventilation Use Only. Do Not Use To
3. CAUTION: "For General Ventilation Use Only. Do Not Use To
Exhaust Hazardous Or Explosive Material and Vapors."
Exhaust Hazardous Or Explosive Material and Vapors."
4. Remove unit from package and inspect within 15 days after
4. Remove unit from package and inspect within 15 days after
receipt. If damaged, report damage to carrier. Do Not operate
receipt. If damaged, report damage to carrier. Do Not operate
this unit with visible damage to the blower or impeller
this unit with visible damage to the blower or impeller
assembly.
assembly.
5. CAUTION: "This unit has an unguarded impeller. Do not use
5. CAUTION: "This unit has an unguarded impeller. Do not use
in locations readily accessible to people or animals." WEAR
in locations readily accessible to people or animals." WEAR
HAND PROTECTION AND STAY CLEAR OF SHARP
HAND PROTECTION AND STAY CLEAR OF SHARP
EDGES!
EDGES!
6. Screen guards must be installed within reach of personnel,
6. Screen guards must be installed within reach of personnel,
within (7) feet of the working area, or when advisable for safety.
within (7) feet of the working area, or when advisable for safety.
7. PLEASE read the entire manual before installing.
7. PLEASE read the entire manual before installing.
Before installation, servicing or cleaning unit, switch power off at serv-
Before installation, servicing or cleaning unit, switch power off at serv-
ice panel and lock the service disconnecting means to prevent power
ice panel and lock the service disconnecting means to prevent power
from being switched on accidentally. When the service disconnecting
from being switched on accidentally. When the service disconnecting
means cannot be locked, securely fasten a prominent warning device,
means cannot be locked, securely fasten a prominent warning device,
such as a tag, to the service panel.
such as a tag, to the service panel.
::
kitchen
Fan Tech at accessories
U N L I M
INSTALLATION AND MAINTENANCE
INSTALLATION AND MAINTENANCE
INSTRUCTIONS FOR MODEL FKD
INSTRUCTIONS FOR MODEL FKD
WARNING
WARNING
I T E D
- www.rangehoods.com