D-Link DWL-2700AP Install Manual page 10

Wireless g outdoor ap/bridge

Hide thumbs Also See for DWL-2700AP:

Table of Contents

Connecting the DWL-2700AP Wireless Access

Point to Your Network

Hardware Installation Overview

Step 1: Complete the Physical Installation first.

Step 2: Connect the remaining end of the supplied Ethernet cable (connected to

the DWL-700AP in Step 1 on page ) to the P+ DATA OUT port on the PoE base

unit.

Step : Connect an Ethernet cable from a router/switch or PC to the DATA IN port

on the PoE base unit.

Step 4: Attach the power adapter to the connector labeled POWER IN on the PoE

base unit. Attach the power cord to the power adapter and into an electrical outlet.

Table of Contents