Futurecom MOBEXCOM DVE User Manual page 10

CONTROL HEAD INDICATORS AND ALPHANUMERIC DISPLAY – MOBILE MODE
STATE
MOBILE RECEIVE WITH
CTCSS
MOBILE RECEIVE
WITHOUT CTCSS
MICROPHONE PTT
RECEIVE WITH CTCSS
RECEIVE WITHOUT
CTCSS
CONTROL HEAD INDICATORS AND ALPHANUMERIC DISPLAY – SYSTEM MODE
STATE
MOBILE RECEIVE WITH
CTCSS
MOBILE RECEIVE
WITHOUT CTCSS
RECEIVE WITH CTCSS
RECEIVE WITHOUT
CTCSS
Note that 'ZONE' and 'CHANNEL' are the selected Mobile zone and channel names, respectively.
Functions Disabled in SYSTEM Mode
There are several control unit button and knob functions, which are disabled in the SYSTEM mode.
These are Scan activation, Mode selection, Zone selection, Home channel operation and Mobile channel
selection.
A standard audible error signal "bop" as well as an error message is displayed
'RSYS VR ACTIVE' if any of the above functions are attempted in the SYSTEM
Futurecom Systems Group Inc. DVE Users Manual 8A084X03_Rev1_31.DOC Rev. Preliminary
'MOBILE BUSY'
ON
ON
'MOBILE BUSY'
ON
ON
NOTE
modes.
'MOBILE XMIT'
'ZONE CHANNEL'
'ZONE CHANNEL'
ON 'ZONE CHANNEL'
'ZONE CHANNEL'
'ZONE CHANNEL'
'MOBILE XMIT'
'RS TX CHANNEL'
'RSYS CHANNEL'
ON 'RS RT CHANNEL'
'RS RX CHANNEL'
DVE
DISPLAY
DISPLAY
Page 10