Page 3
Figure 8 INSTALLING MM651/MM6501 WITH GRILLE Figure 6 Some applications may require using the INSTALLING MM521 ROUND MODEL additional spacer/adapter bracket. Figure 7 INSTALLING MM651& MM6501 WITH GASKET SPACER/ADAPTER BRACKET (for MM651/MM6501 driver installation only)
Page 4
Figure 9 ENGLISH CROSSOVER MOUNTING MM6501 & MM5251 Allow for ventilation clearance. Figure 12 Flush Mount TWEETER MOUNTING spring clip 1. Check for proper clearance: The flush mount crampon-ressort kit is 7/8" (22.2mm) deep. abrazadera de resorte federklemme grampo de mola 2.
Page 5
ENGLISH MM6501 & MM5251 Figure 13 Surface Mount TWEETER MOUNTING 1. Using the base of the surface mount cup as a template, mark the screw hole and drill them 4. Connect wires from the tweeter terminals of using a 1/8" (3mm) drill bit. Drill a second hole the Crossover to the tweeter wires using faston (for the speaker wire) using a 3/16"...
Need help?
Do you have a question about the MM461p and is the answer not in the manual?
Questions and answers